(a) “Performance in a designated operational area,” as used in this section, means performance of a service or construction, as required by the contract. For supply contracts, the term includes services associated with the acquisition of supplies (e.g., installation or maintenance), but does not include production of the supplies or associated overhead functions.

(c) For DoD, this section also applies to all personal services contracts.

(1) Use the clause at FAR 52.225-19, Contractor Personnel in a Designated Operational Area or Supporting a Diplomatic or Consular Mission Outside the United States, in accordance with the prescription at FAR 25.301-4, except that—

(i) The clause shall also be used in personal services contracts with individuals; and

(ii) The clause shall not be used when all contractor personnel performing outside the United States will be covered by the clause at 252.225-7040 .

(2) When using the clause at FAR 52.225-19, the contracting officer shall inform the contractor that the Synchronized Predeployment and Operational Tracker (SPOT) is the appropriate automated system to use for the list of contractor personnel required by paragraph (g) of the clause. Information on the SPOT system is available at https://spot.dmdc.mil and http://www.acq.osd.mil/log/PS/ctr_mgt_accountability.html.

Use the clause at 252.225-7039 , Defense Contractors Performing Private Security Functions Outside the United States, instead of FAR clause 52.225-26, Contractors Performing Private Security Functions Outside the United States, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial products and commercial services, when private security functions are to be performed outside the United States in—

(1) Contingency operations;

(2) Combat operations, as designated by the Secretary of Defense;

(3) Other significant military operations (as defined in 32 CFR part 159), designated by the Secretary of Defense, and only upon agreement of the Secretary of Defense and the Secretary of State;

(4) Peace operations, consistent with Joint Publication 3-07.3; or

(5) Other military operations or military exercises, when designated by the Combatant Commander.

(a) This section applies to contracts that involve contractor personnel supporting U.S. Armed Forces deployed outside the United States in—

(1) Contingency operations;

(2) Humanitarian or peacekeeping operations; or

(3) Other military operations or military exercises, when designated by the combatant commander.

(b) Any of the types of operations listed in paragraph (a) of this subsection may include stability operations such as—

(1) Establishment or maintenance of a safe and secure environment; or

(2) Provision of emergency infrastructure reconstruction, humanitarian relief, or essential governmental services (until feasible to transition to local government).

“Designated operational area” is defined in the clause at 252.225-7040 . See PGI 225.371-2 for additional information on designated operational areas.

(a) Government support that may be authorized or required for contractor personnel performing in a designated operational area may include, but is not limited to, the types of support listed in PGI 225.371-3 (a).

(b) The agency shall provide logistical or security support only when the appropriate agency official, in accordance with agency guidance, determines in coordination with the combatant commander that—

(1) Such Government support is available and is needed to ensure continuation of essential contractor services; and

(2) The contractor cannot obtain adequate support from other sources at a reasonable cost.

(c) The contracting officer shall specify in the solicitation and contract—

(1) Valid terms, approved by the combatant commander, that specify the responsible party, if a party other than the combatant commander is responsible for providing protection to the contractor personnel performing in the designated operational area; and

(2) Any other Government support to be provided, and whether this support will be provided on a reimbursable basis, citing the authority for the reimbursement.

(d) Medical support of contractor personnel. The contracting officer shall provide direction to the contractor when the contractor is required to reimburse the Government for medical treatment or transportation of contractor personnel to a selected civilian facility in accordance with paragraph (c)(2)(ii) of the clause at 252.225-7040 . For additional information, see PGI 225.371-3 (d).

(e) Letter of authorization. Contractor personnel must have a Synchronized Predeployment and Operational Tracker (SPOT)–generated letter of authorization (LOA) signed by the contracting officer in order to process through a deployment center or to travel to, from, or within the designated operational area. The LOA also will identify any additional authorizations, privileges, or Government support that the contractor personnel are entitled to under the contract. For additional information on LOAs, see PGI 225.371-3 (e).

(a) Basic training. Basic law of war training is required for all contractor personnel supporting U.S. Armed Forces deployed outside the United States. The basic training normally will be provided through a military-run training center. The contracting officer may authorize the use of an alternate basic training source, provided the servicing DoD legal advisor concurs with the course content. An example of an alternate source of basic training is the web-based training provided by the Defense Acquisition University at https://acc.dau.mil/CommunityBrowser.aspx?id=18014&lang=en-US.

(b) Advanced law of war training.

(1) The types of personnel that must obtain advanced law of war training include the following:

(i) Private security contractors.

(ii) Security guards in or near areas of military operations.

(iii) Interrogators, linguists, interpreters, guards, report writers, information technology technicians, or others who will come into contact with enemy prisoners of war, civilian internees, retained persons, other detainees, terrorists, or criminals who are captured, transferred, confined, or detained during or in the aftermath of hostilities.

(iv) Other personnel when deemed necessary by the contracting officer.

(2) If contractor personnel will be required to obtain advanced law of war training, the solicitation and contract shall specify—

(i) The types of personnel subject to advanced law of war training requirements;

(ii) Whether the training will be provided by the Government or the contractor;

(iii) If the training will be provided by the Government, the source of the training; and

(iv) If the training will be provided by the contractor, a requirement for coordination of the content with the servicing DoD legal advisor to ensure that training content is commensurate with the duties and responsibilities of the personnel to be trained.

Use the clause 252.225-7980, Contractor Personnel Performing in the United States Africa Command Area of Responsibility ( DEVIATION 2016-O0008)(JUN 2016), in lieu of the clause at DFARS 252.225-7040 , Contractor Personnel Supporting U.S. Armed Forces Deployed Outside the United States, in all solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items, that will require contractor personnel to perform in the United States Africa Command (AFRICOM) area of responsibility. This class deviation remains in effect until incorporated in the DFARS or otherwise rescinded.

Use the clause 252.225-7993, Prohibition on Providing Funds to the Enemy (DEVIATION 2015-O0016)(SEP 2015), in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items, to be awarded on or before December 31, 2019, with an estimated value in excess of $50,000 that are being, or will be, performed outside the United States and its outlying areas, in support of a contingency operation in which members of the Armed Forces are actively engaged in hostilities. This class deviation remains in effect until incorporated in the Federal Acquisition Regulation or otherwise rescinded.

Use the clause 252.225-7981, Additional Access to Contractor and Subcontractor Records (Other than USCENTCOM) (DEVIATION 2015-O0016)(SEP 2015), in solicitations and contracts valued at more than $50,000, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items, that are to be performed outside the United States and its outlying areas, in support of a contingency operation in which members of the armed forces are actively engaged in hostilities, except for contracts that will be performed in the United States Central Command (USCENTCOM) theater of operations. This class deviation remains in effect until incorporated in the Federal Acquisition Regulation or otherwise rescinded.

Use the clause 252.225-7994, Additional Access to Contractor and Subcontractor Records in the United States Central Command Theater of Operations (DEVIATION 2015-O0013)(MAR 2015), in all solicitations and contracts awarded prior to December 19, 2017, valued at more than $100,000, that are to be performed in the United States Central Command (USCENTCOM) theater of operations. This class deviation remains in effect until December 19, 2017 or otherwise rescinded.

Use the clause 252.225-7987, Requirements for Contractor Personnel Performing in USSOUTHCOM Area of Responsibility (DEVIATION 2014-O0016)(OCT 2014), in all solicitations and contracts that require performance in the USSOUTHCOM Area of Responsibility, unless the clause at DFARS 252.225-7040 applies. This class deviation remains in effect until incorporated in the DFARS or otherwise rescinded.

Use the clause at 252.225-7976 Contractor Personnel Performing in Japan (DEVIATION 2018-O0019) (AUG 2018) in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisitions of commercial items, that will require contractor personnel to perform in Japan. The clause requires DoD contractors to account for contractor personnel and dependents in the Synchronized Predeployment and Operational Tracker, in order for the contractor personnel and dependents to be eligible for coverage under the Status of Forces Agreement.

(a) Use the clause at 252.225-7040 , Contractor Personnel Supporting U.S. Armed Forces Deployed Outside the United States, instead of the clause at FAR 52.225-19, Contractor Personnel in a Designated Operational Area or Supporting a Diplomatic or Consular Mission Outside the United States, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial products and commercial services, for performance in a designated operational area that authorize contractor personnel (including both contractors authorized to accompany the Force (CAAF) and non-CAAF) to support U.S. Armed Forces deployed outside the United States in—

(1) Contingency operations;

(2) Peace operations consistent with Joint Publication 3-07.3; or

(3) Other military operations or military exercises, when designated by the combatant commander or as directed by the Secretary of Defense.

(b) For additional guidance on clauses to consider when using the clause at 252.225-7040 , see PGI 225.371-5 (b).

Information and guidance pertaining to DoD antiterrorism/force protection policy for contracts that require performance or travel outside the United States can be obtained from the offices listed in PGI 225.372-1 .

Use the clause at 252.225-7043 , Antiterrorism/Force Protection Policy for Defense Contractors Outside the United States, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial products and commercial services, that require performance or travel outside the United States, except for contracts with—

(a) Foreign governments;

(b) Representatives of foreign governments; or

(c) Foreign corporations wholly owned by foreign governments.

Acquisitions of end products in the following product service groups (PSGs) are covered by trade agreements if the value of the acquisition is at or above the applicable trade agreement threshold and no exception applies. If an end product is not in one of the listed groups, the trade agreements do not apply. The definition of Caribbean Basin country end products in FAR 25.003 excludes those end products that are not eligible for duty-free treatment under 19 U.S.C. 2703(b). Therefore certain watches, watch parts, and luggage from certain Caribbean Basin countries are not eligible products. However, 225.003 expands the definition of Caribbean Basin country end products to include petroleum and any product derived from petroleum, in accordance with Section 8094 of Pub. L. 103-139.

When acquiring products or services, other than small arms, in support of operations in Afghanistan if using a procedure specified in 225.7703-1 (a) (2) or (3), the procedures of subpart 25.4 are not applicable.

DoD personnel are authorized to make emergency acquisitions in direct support of U.S. or allied forces deployed in military contingency, humanitarian, or peacekeeping operations in a country or region subject to economic sanctions administered by the Department of the Treasury, Office of Foreign Assets Control.

As used in this section—

“Component” means an item that is useful only when used in conjunction with an end item (15 CFR 772.1 and 22 CFR 120.45(b)).

“Item” means—

(1) A USML defense article, as defined at 22 CFR 120.6;

(2) A USML defense service, as defined at 22 CFR 120.9; or

(3) A 600 series item, as defined at 15 CFR 772.1.

“Part” means any single unassembled element of a major or minor component, accessory, or attachment, that is not normally subject to disassembly without the destruction or impairment of designed use (15 CFR 772.1 and 22 CFR 120.45(d)).

Do not acquire items covered by the USML or the 600 series of the CCL, through a contract or subcontract at any tier, from any Communist Chinese military company.

This prohibition does not apply to components and parts of covered items unless the components and parts are themselves covered by the USML or the 600 series of the CCL.

The prohibition in 225.770-2 does not apply to items acquired—

(a) In connection with a visit to the People’s Republic of China by a vessel or an aircraft of the U.S. armed forces;

(b) For testing purposes; or

(c) For the purpose of gathering intelligence.

(a) Before issuance of a solicitation, the requiring activity will notify the contracting officer in writing whether the items to be acquired are covered by the USML or the 600 series of the CCL. The notification will identify any covered item(s) and will provide the pertinent USML reference(s) from 22 CFR part 121 or the 600 series of the CCL references from 15 CFR part 774, Supplement No. 1.

(b) The USML includes defense articles and defense services that fall into 21 categories. The CCL includes ten categories and five product groups in each category, many of which contain 600 series items. Since not all items covered by the USML or 600 series of the CCL are themselves munitions (e.g., protective personnel equipment, military training equipment), the requiring activity should consult the USML and the 600 series of the CCL before concluding that an item is or is not covered. See PGI 225.770 -4.

(a) The prohibition in 225.770-2 may be waived, on a case-by-case basis, if an official identified in paragraph (b) of this subsection determines that a waiver is necessary for national security purposes.

(b) The following officials are authorized, without power of delegation, to make the determination specified in paragraph (a) of this subsection:

(1) The Under Secretary of Defense (Acquisition and Sustainment).

(2) The Secretaries of the military departments.

(3) The Component Acquisition Executive of the Defense Logistics Agency.

(c)(1) The official granting a waiver shall submit a report to the congressional defense committees, with a copy to the Principal Director, Defense Pricing, Contracting, and Acquisition Policy (see PGI 225.770-5 ), not less than 15 days before issuing the waiver.

(2) In the report, the official shall—

(i) Identify the specific reasons for the waiver; and

(ii) Include recommendations as to what actions may be taken to develop alternative sourcing capabilities in the future.

This section implements 10 U.S.C. 4871(b).

“State sponsor of terrorism,” as used in this section, is defined in the provision at 252.225-7050 , Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism.

(a) The contracting officer shall not award a contract of $150,000 or more to a firm when a foreign government that is a state sponsor of terrorism owns or controls, either directly or indirectly, a significant interest in—

(i) The firm;

(ii) A subsidiary of the firm; or

(iii) Any other firm that owns or controls the firm.

(b) For restrictions on subcontracting with a firm, or a subsidiary of a firm, that is identified by the Secretary of Defense as being owned or controlled by the government of a country that is a state sponsor of terrorism, see 209.405-2 .

Any disclosure that the government of a country that is a state sponsor of terrorism has a significant interest in an offeror, a subsidiary of an offeror, or any other firm that owns or controls an offeror shall be forwarded through agency channels to the address at PGI 225.771-3 .

The prohibition in 225.771-2 may be waived if the Secretary of Defense determines that a waiver is not inconsistent with the national security objectives of the United States in accordance with 10 U.S.C. 4871(c).

Use the provision at 252.225-7050 , Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism, in solicitations, including solicitations using FAR part 12 procedures for the acquisition of commercial products and commercial services (other than commercial satellite services), that are expected to result in contracts of $150,000 or more. If the solicitation includes the provision at FAR 52.204-7, do not separately list the provision 252.225-7050 in the solicitation.

This section implements 10 U.S.C. 2279.

As used in this section—

“Covered foreign country” means—

(1) The People’s Republic of China;

(2) North Korea;

(3) The Russian Federation; or

(4) Any country that is a state sponsor of terrorism. (10 U.S.C. 2279)

“Cybersecurity risk” means threats to and vulnerabilities of information or information systems and any related consequences caused by or resulting from unauthorized access, use, disclosure, degradation, disruption, modification, or destruction of such information or information systems, including such related consequences caused by an act of terrorism. (10 U.S.C. 2279)

“Foreign entity” means—

(1) Any branch, partnership, group or sub-group, association, estate, trust, corporation or division of a corporation, or organization organized under the laws of a foreign state if either its principal place of business is outside the United States or its equity securities are primarily traded on one or more foreign exchanges.

(2) Notwithstanding paragraph (1) of this definition, any branch, partnership, group or sub-group, association, estate, trust, corporation or division of a corporation, or organization that demonstrates that a majority of the equity interest in such entity is ultimately owned by U.S. nationals is not a foreign entity. (31 CFR 800.212)

“Government of a covered foreign country” includes the state and the government of a covered foreign country, as well as any political subdivision, agency, or instrumentality thereof.

“Launch vehicle” means a fully integrated space launch vehicle. (10 U.S.C. 2279)

“Satellite services” means communications capabilities that utilize an on-orbit satellite for transmitting the signal from one location to another.

“State sponsor of terrorism” means a country determined by the Secretary of State, under section 1754(c)(1)(A)(i) of the Export Control Reform Act of 2018 (Title XVII, Subtitle B, of the National Defense Authorization Act for Fiscal Year 2019, Pub. L. 115-232),to be a country the government of which has repeatedly provided support for acts of international terrorism. As of December 14, 2020, state sponsors of terrorism include Iran, North Korea, and Syria. ( 10 U.S.C. 4871 )

Except as provided in 225.772-4 , the contracting officer shall not award a contract for commercial satellite services to—

(a)(1) A foreign entity if the Under Secretary of Defense for Acquisition and Sustainment or the Under Secretary of Defense for Policy reasonably believes that—

(i) The foreign entity is an entity in which the government of a covered foreign country has an ownership interest that enables the government to affect satellite operations;

(ii) The foreign entity plans to or is expected to provide satellite services under the contract from a covered foreign country; or

(iii) Entering into such contract would create an unacceptable cybersecurity risk for DoD, as determined by the Under Secretary of Defense for Acquisition and Sustainment or the Under Secretary of Defense for Policy; or

(2) An offeror that is offering commercial satellite services provided by a foreign entity as described in paragraph (a) of this section; or

(b)(1) Any entity, except as provided in paragraph (b)(2) of this section, for a launch that occurs on or after December 31, 2022, if the Under Secretary of Defense for Acquisition and Sustainment or the Under Secretary of Defense for Policy reasonably believes that such satellite services will be provided using satellites that will be—

(i) Designed or manufactured—

(A) In a covered foreign country; or

(B) By an entity controlled in whole or in part by, or acting on behalf of, the government of a covered foreign country; or

(ii) Launched outside the United States using a launch vehicle that is—

(A) Designed or manufactured in a covered foreign country; or

(B) Provided by—

(1) The government of a covered foreign country; or

(2) An entity controlled in whole or in part by, or acting on behalf of, the government of a covered foreign country.

(2) The prohibition in paragraph (b)(1) of this section does not apply with respect to launch services for which a satellite service provider has a contract or other agreement that, prior to June 10, 2018, was either fully paid for by the satellite service provider or covered by a legally binding commitment of the satellite service provider to pay for such services.

(a)(1) The contracting officer shall not award to any source that is a foreign satellite service provider or is offering satellite services provided by a foreign entity if such award presents an unacceptable cybersecurity risk, as determined by the Under Secretary of Defense for Acquisition and Sustainment or the Under Secretary of Defense for Policy.

(2) When procuring commercial satellite services from a foreign entity, the contracting officer shall review the exclusion records in the System for Award Management (SAM) database as required at FAR 9.405, to ensure that an entity identified in, or otherwise known to be involved in, the otherwise successful offer is not listed as ineligible in the SAM database (see FAR 9.405).

(b) If an offeror discloses information in accordance with paragraph (c) of the provision 252.225-7049 , Prohibition on Acquisition of Certain Foreign Commercial Satellite Services—Representations, the contracting officer—

(1) Shall forward the information regarding the offeror through agency channels to the address at PGI 225.772-3 ; and

(2) Shall not award to that offeror, unless an exception is determined to apply in accordance with 225.772-4 .

(c)(1) If the otherwise successful offeror provides negative responses to all representations in the provision at 252.225-7049 , the contracting officer may rely on the representations, unless the contracting officer has an independent reason to question the representations.

(2) If the contracting officer has an independent reason to question a negative representation of the otherwise successful offeror, the contracting officer shall consult with the office specified in PGI 225.772-3 , prior to deciding whether to award to that offeror.

(a) The prohibitions in 225.772-2 (a) and (b) do not apply if–

(1) The Under Secretary of Defense for Acquisition and Sustainment, or the Under Secretary of Defense for Policy, without power of redelegation, determines that it is in the national security interest of the United States to enter into such contract; and

(2) Not later than seven days before entering into such contract, the Under Secretary of Defense making the determination in paragraph (a)(1) of this section, in consultation with the Director of National Intelligence, submits to the congressional defense committees a national security assessment, in accordance with 10 U.S.C. 2279.

(b) If requesting an exception pursuant to paragraph (a) of this section, the contracting officer shall forward the request through agency channels to the address at PGI 225.772-3 , providing any available information necessary for the Under Secretary of Defense making the determination in paragraph (a)(1) of this section to evaluate the request and perform a national security assessment, in accordance with 10 U.S.C. 2279.

(a) Use the provision at 252.225-7049, Prohibition on Acquisition of Certain Foreign Commercial Satellite Services - Representations, in solicitations that include the clause at 252.225-7051, Prohibition on Acquisition of Certain Foreign Commercial Satellite Services. If the solicitation includes the provision at FAR 52.204-7, do not separately list the provision 252.225-7049 in the solicitation.

(b) Use the clause at 252.225-7051, Prohibition on Acquisition of Certain Foreign Commercial Satellite Services, in solicitations and contracts for the acquisition of commercial satellite services, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial products and commercial services.

(c) Use the clause at 252.239-7018, Supply Chain Risk, as prescribed at 239.7306(b), when applicable.

Follow the procedures at PGI 225.802-70 when placing a contract requiring performance outside the United States and Canada. Also see subpart 225.3, Contracts Performed Outside the United States.

Contracting officers considering the purchase of an item from a foreign source may encounter a request for the signing of a certificate to indicate that the Armed Forces of the United States is the end user of the item, and that the U.S. Government will not transfer the item to third parties without authorization from the Government of the country selling the item. When encountering this situation, refer to DoD Directive 2040.3, End Use Certificates, for guidance.

(a) The Canadian government guarantees to the U.S. Government all commitments, obligations, and covenants of the Canadian Commercial Corporation under any contract or order issued to the Corporation by any contracting office of the U.S. Government. The Canadian government has waived notice of any change or modification that may be made, from time to time, in these commitments, obligations, or covenants.

(b) For production planning purposes, Canada is part of the defense industrial base (see 225.870-2 (b)).

(c) The Canadian Commercial Corporation will award and administer contracts with contractors located in Canada, except for—

(1) Negotiated acquisitions for experimental, developmental, or research work under projects other than the Defense Development Sharing Program;

(2) Acquisitions of unusual or compelling urgency;

(3) Acquisitions at or below the simplified acquisition threshold; or

(4) Acquisitions made by DoD activities located in Canada.

(d) For additional information on production rights, data, and information; services provided by Canadian Commercial Corporation; audit; and inspection, see PGI 225.870-1 (d).

(a) If requested, furnish a solicitation to the Canadian Commercial Corporation even if no Canadian firm is solicited.

(b) Handle acquisitions at or below the simplified acquisition threshold directly with Canadian firms and not through the Canadian Commercial Corporation.

(a) As indicated in 225.870-4 , the Canadian Commercial Corporation is the prime contractor. To indicate acceptance of offers by individual Canadian companies, the Canadian Commercial Corporation issues a letter supporting the Canadian offer and containing the following information:

(1) Name of the Canadian offeror.

(2) Confirmation and endorsement of the offer in the name of the Canadian Commercial Corporation.

(3) A statement that the Corporation shall subcontract 100 percent with the offeror.

(b) When a Canadian offer cannot be processed through the Canadian Commercial Corporation in time to meet the date for receipt of offers, the Corporation may permit Canadian firms to submit offers directly. However, the contracting officer shall receive the Canadian Commercial Corporation's endorsement before contract award.

(c) The Canadian Commercial Corporation will submit all sealed bids in terms of U.S. currency. Do not adjust contracts awarded under sealed bidding for losses or gains from fluctuation in exchange rates.

(d) Except for sealed bids, the Canadian Commercial Corporation normally will submit offers and quotations in terms of Canadian currency. The Corporation may, at the time of submitting an offer, elect to quote and receive payment in terms of U.S. currency, in which case the contract—

(1) Shall provide for payment in U.S. currency; and

(2) Shall not be adjusted for losses or gains from fluctuation in exchange rates.

(a) Except for contracts described in 225.870-1(c)(1) through (4), award individual contracts covering purchases from suppliers located in Canada to the Canadian Commercial Corporation, 350 Albert Street, Suite 700, Ottawa, ON K1R 1A4.

(b) Direct communication with the Canadian supplier is authorized and encouraged in connection with all technical aspects of the contract, provided the Corporation's approval is obtained on any matters involving changes to the contract.

(c) Requirement for data other than certified cost or pricing data. (1) DoD has waived the requirement for submission of certified cost or pricing data for the Canadian Commercial Corporation and its subcontractors (see 215.403-1(c)(4)(C)).

(2) The Canadian Commercial Corporation is not exempt from the requirement to submit data other than certified cost or pricing data, as defined in FAR 2.101. In accordance with FAR 15.403-3(a)(1)(ii), the contracting officer shall require submission of data other than certified cost or pricing data from the offeror, to the extent necessary to determine a fair and reasonable price.

(i) No further approval is required to request data other than certified cost or pricing data from the Canadian Commercial Corporation in the following circumstances:

(A) In a solicitation for a sole source acquisition that is -

(1) Cost-reimbursement, if the contract value is expected to exceed $700,000; or

(2) Fixed-price, if the contract value is expected to exceed $500 million.

(B) If the Canadian Commercial Corporation submits the only offer in response to a competitive solicitation that meets the thresholds specified in paragraph (c)(2)(i)(A) of this section.

(C) For modifications that exceed $150,000 in contracts that meet the criteria in paragraph (c)(2)(i)(A) or (B) of this section.

(D) In competitive solicitations in which data other than certified cost or pricing data are required from all offerors.

(ii) In any circumstances other than those specified in paragraph (c)(2)(i) of this section, the contracting officer shall only require data other than certified cost or pricing data from the Canadian Commercial Corporation if the head of the contracting activity, or designee no lower than two levels above the contracting officer, determines that data other than certified cost or pricing data are needed (or in the case of modifications that it is reasonably certain that data other than certified cost or pricing data will be needed) in order to determine that the price is fair and reasonable) (see FAR 15.403-3(a).

(3) The contracting officer shall use the provision at 252.215-7003, Requirement for Submission of Data Other Than Certified Cost or Pricing Data - Canadian Commercial Corporation, and the clause at 252.215-7004, Requirement for Submission of Data Other Than Certified Cost or Pricing Data - Modifications - Canadian Commercial Corporation, as prescribed at 215.408(2)(i) and (ii), respectively.

(4) Except for contracts described in 225.870-1(c)(1) through (4), Canadian suppliers will provide required data other than certified cost or pricing data exclusively through the Canadian Commercial Corporation.

(5) As specified in FAR 15.403-3(a)(4), an offeror who does not comply with a requirement to submit data that the contracting officer has deemed necessary to determine price reasonableness or cost realism is ineligible for award, unless the head of the contracting activity determines that it is in the best interest of the Government to make the award to that offeror, based on consideration of the following:

(i) The effort made to obtain the data.

(ii) The need for the item or service.

(iii) Increased cost or significant harm to the Government if award is not made.

(d) Identify in the contract, the type of currency, i.e., U.S. or Canadian. Contracts that provide for payment in Canadian currency shall -

(1) Quote the contract price in terms of Canadian dollars and identify the amount by the initials “CN”, e.g., $1,647.23CN; and

(2) Clearly indicate on the face of the contract the U.S./Canadian conversion rate at the time of award and the U.S. dollar equivalent of the Canadian dollar contract amount.

Follow the contract administration procedures at PGI 225.870-5 .

When contract termination is necessary, follow the procedures at 249.7000 .

For information on the acceptance of Canadian supplies, see PGI 225.870-7 .

Industrial security for Canada shall be in accordance with the U.S.-Canada Industrial Security Agreement of March 31, 1952, as amended.

This section implements 22 U.S.C. 2767 and 10 U.S.C. 2350b.

As used in this section—

(a) “Cooperative project” means a jointly managed arrangement—

(1) Described in a written agreement between the parties;

(2) Undertaken to further the objectives of standardization, rationalization, and interoperability of the armed forces of NATO member countries; and

(3) Providing for—

(i) One or more of the other participants to share with the United States the cost of research and development, testing, evaluation, or joint production (including follow-on support) of certain defense articles;

(ii) Concurrent production in the United States and in another member country of a defense article jointly developed; or

(iii) Acquisition by the United States of a defense article or defense service from another member country.

(b) “Other participant” means a cooperative project participant other than the United States.

(a) Cooperative project authority.

(1) Departments and agencies, that have authority to do so, may enter into cooperative project agreements with NATO or with one or more member countries of NATO under DoDD 5530.3, International Agreements.

(2) Under laws and regulations governing the negotiation and implementation of cooperative project agreements, departments and agencies may enter into contracts, or incur other obligations, on behalf of other participants without charge to any appropriation or contract authorization.

(3) Agency heads are authorized to solicit and award contracts to implement cooperative projects.

(b) Contracts implementing cooperative projects shall comply with all applicable laws relating to Government acquisition, unless a waiver is granted under 225.871-4 . A waiver of certain laws and regulations may be obtained if the waiver—

(1) Is required by the terms of a written cooperative project agreement;

(2) Will significantly further NATO standardization, rationalization, and interoperability; and

(3) Is approved by the appropriate DoD official.

(a) For contracts or subcontracts placed outside the United States, the Deputy Secretary of Defense may waive any provision of law that specifically prescribes—

(1) Procedures for the formation of contracts;

(2) Terms and conditions for inclusion in contracts;

(3) Requirements or preferences for—

(i) Goods grown, produced, or manufactured in the United States or in U.S. Government-owned facilities; or

(ii) Services to be performed in the United States; or

(4) Requirements regulating the performance of contracts.

(b) There is no authority for waiver of—

(1) Any provision of the Arms Export Control Act (22 U.S.C. 2751);

(2) Any provision of 10 U.S.C. 3201-3205;

(3) The cargo preference laws of the United States, including the Military Cargo Preference Act of 1904 (10 U.S.C. 2631) and the Cargo Preference Act of 1954 (46 U.S.C. 1241(b)); or

(4) Any of the financial management responsibilities administered by the Secretary of the Treasury.

(c) To request a waiver under a cooperative project, follow the procedures at PGI 225.871-4 .

(d) Obtain the approval of the Deputy Secretary of Defense before committing to make a waiver in an agreement or a contract.

(a) The Principal Director, Defense Pricing, Contracting, and Acquisition Policy may authorize the direct placement of subcontracts with particular subcontractors. Directed subcontracting is not authorized unless specifically addressed in the cooperative project agreement.

(b) In some instances, it may not be feasible to name specific subcontractors at the time the agreement is concluded. However, the agreement shall clearly state the general provisions for work sharing at the prime and subcontract level. For additional information on cooperative project agreements, see PGI 225.871-5 .

Dispose of property that is jointly acquired by the members of a cooperative project under the procedures established in the agreement or in a manner consistent with the terms of the agreement, without regard to any laws of the United States applicable to the disposal of property owned by the United States.

(a) Congressional notification is required when DoD makes a determination to award a contract or subcontract to a particular entity, if the determination was not part of the certification made under 22 U.S.C. 2767(f) before finalizing the cooperative agreement.

(1) Departments and agencies shall provide a proposed Congressional notice to the Principal Director, Defense Pricing, Contracting, and Acquisition Policy in sufficient time to forward to Congress before the time of contract award.

(2) The proposed notice shall include the reason it is necessary to use the authority to designate a particular contractor or subcontractor.

(b) Congressional notification is also required each time a statutory waiver under 225.871-4 is incorporated in a contract or a contract modification, if such information was not provided in the certification to Congress before finalizing the cooperative agreement.

(a) As a result of memoranda of understanding and other international agreements, DoD has determined it inconsistent with the public interest to apply restrictions of the Buy American statute or the Balance of Payments Program to the acquisition of qualifying country end products from the following qualifying countries:

Australia

Belgium

Canada

Czech Republic

Denmark

Egypt

Estonia

Federal Republic of Germany

Finland

France

Greece

Israel

Italy

Japan

Latvia

Lithuania

Luxembourg

Netherlands

Norway

Poland

Portugal

Slovenia

Spain

Sweden

Switzerland

Turkey

United Kingdom of Great Britain and Northern Ireland

(b) Individual acquisitions of qualifying country end products from the following qualifying country may, on a purchase-by-purchase basis (see 225.872-4 ), be exempted from application of the Buy American statute and the Balance of Payments Program as inconsistent with the public interest:

(c) The determination in paragraph (a) of this subsection does not limit the authority of the Secretary concerned to restrict acquisitions to domestic sources or reject an otherwise acceptable offer from a qualifying country source when considered necessary for national defense reasons.

(a) This section applies to all acquisitions of supplies except those restricted by—

(1) U.S. National Disclosure Policy, DoDD 5230.11, Disclosure of Classified Military Information to Foreign Governments and International Organizations;

(2) U.S. defense mobilization base requirements purchased under the authority of FAR 6.302-3(a)(2)(i), except for quantities in excess of that required to maintain the defense mobilization base. This restriction does not apply to Canadian planned producers.

(i) Review individual solicitations to determine whether this restriction applies.

(ii) Information concerning restricted items may be obtained from the Deputy Assistant Secretary of Defense for(Industrial Base Policy);

(3) Other U.S. laws or regulations (e.g., the annual DoD appropriations act); and

(4) U.S. industrial security requirements.

(b) This section does not apply to construction contracts.

(a) Except for items developed under the U.S./Canadian Development Sharing Program, use the criteria for soliciting and awarding contracts to small business concerns under FAR Part 19 without regard to whether there are potential qualifying country sources for the end product. Do not consider an offer of a qualifying country end product if the solicitation is identified for the exclusive participation of small business concerns.

(b) Send solicitations directly to qualifying country sources. Solicit Canadian sources through the Canadian Commercial Corporation in accordance with 225.870 .

(c) Use international air mail if solicitation destinations are outside the United States and security classification permits such use.

(d) If unusual technical or security requirements preclude the acquisition of otherwise acceptable defense equipment from qualifying country sources, review the need for such requirements. Do not impose unusual technical or security requirements solely for the purpose of precluding the acquisition of defense equipment from qualifying countries.

(e) Do not automatically exclude qualifying country sources from submitting offers because their supplies have not been tested and evaluated by the department or agency.

(1) Consider the adequacy of qualifying country service testing on a case-by-case basis. Departments or agencies that must limit solicitations to sources whose items have been tested and evaluated by the department or agency shall consider supplies from qualifying country sources that have been tested and accepted by the qualifying country for service use.

(2) The department or agency may perform a confirmatory test, if necessary.

(3) Apply U.S. test and evaluation standards, policies, and procedures when the department or agency decides that confirmatory tests of qualifying country end products are necessary.

(4) If it appears that these provisions might adversely delay service programs, obtain the concurrence of the Under Secretary of Defense (Acquisition and Sustainment), before excluding the qualifying country source from consideration.

(f) Permit industry representatives from a qualifying country to attend symposia, program briefings, prebid conferences (see FAR 14.207 and 15.201(c)), and similar meetings that address U.S. defense equipment needs and requirements. When practical, structure these meetings to allow attendance by representatives of qualifying country concerns.

If the offer of an end product from a qualifying country source listed in 225.872-1 (b), as evaluated, is low or otherwise eligible for award, prepare a determination and findings exempting the acquisition from the Buy American statute and the Balance of Payments Program as inconsistent with the public interest, unless another exception such as the Trade Agreements Act applies. Follow the procedures at PGI 225.872-4 .

(a) Arrangements exist with some qualifying countries to provide reciprocal contract administration services. Some arrangements are at no cost to either government. To determine whether such an arrangement has been negotiated and what contract administration functions are covered, contact the Office of the Principal Director, Defense Pricing, Contracting, and Acquisition Policy (Contract Policy) via email at osd.pentagon.ousd-a-s.mbx.asda-dp-c-contractpolicy@mail.mil.

(b) Follow the contract administration procedures at PGI 225.872-5 (b).

(c) Information on quality assurance delegations to foreign governments is in Subpart 246.4, Government Contract Quality Assurance.

Handle requests for audit services in France, Germany, the Netherlands, or the United Kingdom in accordance with PGI 215.404-2 (c), but follow the additional procedures at PGI 225.872-6 .

The required procedures for safeguarding classified defense information necessary for the performance of contracts awarded to qualifying country sources are in the National Industrial Security Program Operating Manual, 32 CFR part 117 (implemented for the Army by AR 380-49; for the Navy by SECNAV Instruction 5510.1H; for the Air Force by AFI 31-601; for the Defense Information Systems Agency by DCA Instruction 240-110-8; and for the National Imagery and Mapping Agency by NIMA Instruction 5220.22).

In reviewing contractor subcontracting procedures, the contracting officer shall ensure that the contract does not preclude qualifying country sources from competing for subcontracts, except when restricted by national security interest reasons, mobilization base considerations, or applicable U.S. laws or regulations (see the clause at 252.225-7002 , Qualifying Country Sources as Subcontractors).

DoD and the Government of the United Kingdom (U.K.) have agreed to waive U.K. commercial exploitation levies and U.S. nonrecurring cost recoupment charges on a reciprocal basis. For U.K. levies to be waived, the offeror or contractor shall identify the levies and the contracting officer shall request a waiver before award of the contract or subcontract under which the levies are charged.

When an offeror or a contractor identifies a levy included in an offered or contract price, follow the procedures at PGI 225.873-2 .

“Component,” as used in this subpart, means any item supplied to the Government as part of an end product or of another component.

(a) The following restrictions implement 10 U.S.C. 4862 (the “Berry Amendment”). Except as provided in subsection 225.7002-2 , do not acquire—

(1) Any of the following items, either as end products or components, unless the items have been grown, reprocessed, reused, or produced in the United States:

(i) Food.

(ii) Clothing and the materials and components thereof, other than sensors, electronics, or other items added to, and not normally associated with, clothing and the materials and components thereof. Clothing includes items such as outerwear, headwear, underwear, nightwear, footwear, hosiery, handwear, belts, badges, and insignia. For additional guidance and examples, see PGI 225.7002-1 (a)(1)(ii).

(iii)(A) Tents and the structural components of tents;

(B) Tarpaulins; or

(C) Covers.

(iv) Cotton and other natural fiber products.

(v) Woven silk or woven silk blends.

(vi) Spun silk yarn for cartridge cloth.

(vii) Synthetic fabric or coated synthetic fabric, including all textile fibers and yarns that are for use in such fabrics.

(viii) Canvas products.

(ix) Wool (whether in the form of fiber or yarn or contained in fabrics, materials, or manufactured articles).

(x) Any item of individual equipment (Product or Service Code (PSC) 8465) manufactured from or containing any of the fibers, yarns, fabrics, or materials listed in this paragraph (a)(1).

(2) Hand or measuring tools, unless the tools were produced in the United States. For additional guidance, see PGI 225.7002-1 (a)(2).

(b) In accordance with section 8123 of the Department of Defense Appropriations Act, 2014 (Pub. L. 113-76, division C, title VIII), and the same provision in subsequent Defense appropriations acts, except as provided in 225.7002-2 , do not acquire a flag of the United States (PSC 8345), unless such flag, including the materials and components thereof, is manufactured in the United States, consistent with the requirements at10 U.S.C. 4862. This restriction does not apply to the acquisition of any end items or components related to flying or displaying the flag (e.g., flag poles and accessories).

Acquisitions in the following categories are not subject to the restrictions in 225.7002-1:

(a) Acquisitions not exceeding $150,000, except for athletic footwear purchased by DoD for use by members of the Army, Navy, Air Force, or Marine Corps upon their initial entry into the Armed Forces (37 U.S.C. 418(b)(4)).

(b) Acquisitions of any of the items in 225.7002-1, if the Secretary concerned determines that items grown, reprocessed, reused, or produced in the United States cannot be acquired as and when needed in a satisfactory quality and sufficient quantity at U.S. market prices. (See the requirement in 205.301 for synopsis within 7 days after contract award when using this exception.)

(1) The following officials are authorized, without power of redelegation, to make such a domestic nonavailability determination:

(i) The Under Secretary of Defense (Acquisition and Sustainment).

(ii) The Secretary of the Army.

(iii) The Secretary of the Navy.

(iv) The Secretary of the Air Force.

(v) The Director of the Defense Logistics Agency.

(2) The supporting documentation for the determination shall include an analysis and written certification by the requiring activity, with specificity, why alternatives that would not require a domestic nonavailability determination are unacceptable.

(3) Defense agencies other than the Defense Logistics Agency shall follow the procedures at PGI 225.7002-2 (b)(3) when submitting a request for a domestic nonavailability determination.

(c) Acquisitions of items listed in FAR 25.104(a).

(d) Acquisitions outside the United States in support of combat operations.

(e) Acquisitions of perishable foods by or for activities located outside the United States for personnel of those activities.

(f) Acquisitions of food or hand or measuring tools—

(1) In support of contingency operations; or

(2) For which the use of other than competitive procedures has been approved on the basis of unusual and compelling urgency in accordance with FAR 6.302-2.

(g) Emergency acquisitions by activities located outside the United States for personnel of those activities.

(h) Acquisitions by vessels in foreign waters.

(i) Acquisitions of items specifically for commissary resale.

(j) Acquisitions of incidental amounts of cotton, other natural fibers, or wool incorporated in an end product, for which the estimated value of the cotton, other natural fibers, or wool—

(1) Is not more than 10 percent of the total price of the end product; and

(2) Does not exceed the threshold at 225.7002-2(a).

(k) Acquisitions of waste and byproducts of cotton or wool fiber for use in the production of propellants and explosives.

(l) Acquisitions of foods manufactured or processed in the United States, regardless of where the foods (and any component if applicable) were grown or produced. However, in accordance with section 8118 of the DoD Appropriations Act for Fiscal Year 2005 (Pub. L. 108-287), this exception does not apply to fish, shellfish, or seafood manufactured or processed in the United States or fish, shellfish, or seafood contained in foods manufactured or processed in the United States.

(m) Acquisitions of fibers and yarns that are for use in synthetic fabric or coated synthetic fabric (but not the purchase of the synthetic or coated synthetic fabric itself), if—

(1) The fabric is to be used as a component of an end product that is not a textile product. Examples of textile products, made in whole or in part of fabric, include—

(i) Draperies, floor coverings, furnishings, and bedding (Product or Service Group (PSG) 72, Household and Commercial Furnishings and Appliances);

(ii) Items made in whole or in part of fabric in PSG 83, Textile/leather/furs/apparel/findings/tents/flags, or PSG 84, Clothing, Individual Equipment and Insignia;

(iii) Upholstered seats (whether for household, office, or other use); and

(iv) Parachutes ( PSG 1670); or

(2) The fibers and yarns are para-aramid fibers and continuous filament para-aramid yarns manufactured in a qualifying country.

(n) Acquisitions of chemical warfare protective clothing when the acquisition furthers an agreement with a qualifying country. (See 225.003 (10) and the requirement in 205.301 for synopsis within 7 days after contract award when using this exception.)

(o) Acquisitions that are interagency, State, or local purchases that are executed by DoD as a result of the transfer of contracts from the General Services Administration or for which DoD serves as an item manager for products on behalf of the General Services Administration. According to section 897 of the National Defense Authorization Act for Fiscal Year 2016 (Pub. L. 114-92), such contracts shall not be subject to requirements under subchapter II of chapter 385, United States Code (including 10 U.S.C. 4862), to the extent such contracts are for purchases of products by other Federal agencies or State or local governments.

Unless an exception at 225.7002-2 applies—

(a) Use the clause at 252.225-7012 , Preference for Certain Domestic Commodities, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial products and commercial services.

(b) Use the clause at 252.225-7015 , Restriction on Acquisition of Hand or Measuring Tools, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial products and commercial services, that exceed the threshold at 225.7002-2(a) that require delivery of hand or measuring tools.

(c) Use the clause at 252.225-7006 , Acquisition of the American Flag, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial products and commercial services, that are for the acquisition of the American flag, with an estimated value that exceeds the threshold at 225.7002-2(a).

As used in this section—

“Alloy” means a metal consisting of a mixture of a basic metallic element and one or more metallic, or non-metallic, alloying elements.

(1) For alloys named by a single metallic element (e.g., titanium alloy), it means that the alloy contains 50 percent or more of the named metal (by mass).

(2) If two metals are specified in the name (e.g., nickel-iron alloy), those metals are the two predominant elements in the alloy, and together they constitute 50 percent or more of the alloy (by mass).

“Automotive item”—

(1) Means a self-propelled military transport tactical vehicle, primarily intended for use by military personnel or for carrying cargo, such as—

(i) A high-mobility multipurpose wheeled vehicle;

(ii) An armored personnel carrier; or

(iii) A troop/cargo-carrying truckcar, truck, or van; and

(2) Does not include—

(i) A commercially available off-the-shelf vehicle; or

(ii) Construction equipment (such as bulldozers, excavators, lifts, or loaders) or other self-propelled equipment (such as cranes or aircraft ground support equipment).

“Commercial derivative military article” means an item acquired by the Department of Defense that is or will be produced using the same production facilities, a common supply chain, and the same or similar production processes that are used for the production of articles predominantly used by the general public or by nongovernmental entities for purposes other than governmental purposes.

“Electronic component” means an item that operates by controlling the flow of electrons or other electrically charged particles in circuits, using interconnections of electrical devices such as resistors, inductors, capacitors, diodes, switches, transistors, or integrated circuits. The term does not include structural or mechanical parts of an assembly containing an electronic component and does not include any high performance magnets that may be used in the electronic component.

“High performance magnet” means a permanent magnet that obtains a majority of its magnetic properties from rare earth metals (such as samarium).

“Produce” means—

(1) Atomization;

(2) Sputtering; or

(3) Final consolidation of non-melt derived metal powders.

“Specialty metal” means—

(1) Steel—

(i) With a maximum alloy content exceeding one or more of the following limits: manganese, 1.65 percent; silicon, 0.60 percent; or copper, 0.60 percent; or

(ii) Containing more than 0.25 percent of any of the following elements: aluminum, chromium, cobalt, molybdenum, nickel, niobium (columbium), titanium, tungsten, or vanadium;

(2) Metal alloys consisting of—

(i) Nickel or iron-nickel alloys that contain a total of alloying metals other than nickel and iron in excess of 10 percent; or

(ii) Cobalt alloys that contain a total of alloying metals other than cobalt and iron in excess of 10 percent;

(3) Titanium and titanium alloys; or

(4) Zirconium and zirconium alloys.

“Steel” means an iron alloy that includes between .02 and 2 percent carbon and may include other elements.

(a) The following restrictions implement 10 U.S.C. 4863. Except as provided in 225.7003-3 —

(1) Do not acquire the following items, or any components of the following items, unless any specialty metals contained in the items or components are melted or produced in the United States (also see guidance at 225.7003-2 (a)):

(i) Aircraft.

(ii) Missile or space systems.

(iii) Ships.

(iv) Tank or automotive items.

(v) Weapon systems.

(vi) Ammunition.

(2) Do not acquire a specialty metal (e.g., raw stock, including bar, billet, slab, wire, plate, and sheet; castings; and forgings) as an end item, unless the specialty metal is melted or produced in the United States. This restriction applies to specialty metal acquired by a contractor for delivery to DoD as an end item, in addition to specialty metal acquired by DoD directly from the entity that melted or produced the specialty metal.

(b) For more information on specialty metals restrictions and reporting of noncompliances, see https://www.acq.osd.mil/asda/dpc/cp/ic/specialty-metals-restrictions.html .

(a) Acquisitions in the following categories are not subject to the restrictions in 225.7003-2 :

(1) Acquisitions at or below the simplified acquisition threshold.

(2) Acquisitions outside the United States in support of combat operations.

(3) Acquisitions in support of contingency operations.

(4) Acquisitions for which the use of other than competitive procedures has been approved on the basis of unusual and compelling urgency in accordance with FAR 6.302-2.

(5) Acquisitions of items specifically for commissary resale.

(6) Acquisitions of items for test and evaluation under the foreign comparative testing program (10 U.S.C. 2350a(g)). However, this exception does not apply to any acquisitions under follow-on production contracts.

(b) One or more of the following exceptions may apply to an end item or component that includes any of the following, under a prime contract or subcontract at any tier. The restrictions in 225.7003-2 do not apply to the following:

(1) Electronic components, unless the Secretary of Defense, upon the recommendation of the Strategic and Critical Materials Board of Directors pursuant to 50 U.S.C. 98h-1 , determines that the domestic availability of a particular electronic component is critical to national security.

(2)(i) Commercially available off-the-shelf (COTS) items containing specialty metals, except the restrictions do apply to contracts or subcontracts for the acquisition of—

(A) Specialty metal mill products, such as bar, billet, slab, wire, plate, and sheet, that have not been incorporated into end items, subsystems, assemblies, or components. Specialty metal supply contracts issued by COTS producers are not subcontracts for the purposes of this exception;

(B) Forgings or castings of specialty metals, unless the forgings or castings are incorporated into COTS end items, subsystems, or assemblies;

(C) Commercially available high performance magnets that contain specialty metal, unless such high performance magnets are incorporated into COTS end items or subsystems (see PGI 225.7003-3 (b)(6) for a table of applicability of specialty metals restrictions to magnets); and

(D) COTS fasteners, unless—

(1) The fasteners are incorporated into COTS end items, subsystems, or assemblies; or

(2) The fasteners qualify for the commercial product exception in paragraph (b)(3) of this subsection.

(ii) If this exception is used for an acquisition of COTS end items valued at $5 million or more per item, the acquiring department or agency shall submit an annual report to the Principal Director, Defense Pricing, Contracting, and Acquisition Policy, in accordance with the procedures at PGI 225.7003-3 (b)(2).

(3) Fasteners that are commercial products and are acquired under a contract or subcontract with a manufacturer of such fasteners, if the manufacturer has certified that it will purchase, during the relevant calendar year, an amount of domestically melted or produced specialty metal, in the required form, for use in the production of fasteners for sale to DoD and other customers, that is not less than 50 percent of the total amount of the specialty metal that the manufacturer will purchase to carry out the production of such fasteners for all customers.

(4) Items listed in 225.7003-2 (a), manufactured in a qualifying country or containing specialty metals melted or produced in a qualifying country.

(5) Specialty metal in any of the items listed in 225.7003-2 if the USD(A&S), or an official authorized in accordance with paragraph (b)(5)(i) of this subsection, determines that specialty metal melted or produced in the United States cannot be acquired as and when needed at a fair and reasonable price in a satisfactory quality, a sufficient quantity, and the required form (i.e., a domestic nonavailability determination). In accordance with 10 U.S.C. 4863(m)(4), the term “required form” in this section refers to the form of the mill product, such as bar, billet, wire, slab, plate, or sheet, in the grade appropriate for the production of a finished end item to be delivered to the Government under this contract; or a finished component assembled into an end item to be delivered to the Government under the contract. See guidance in PGI 225.7003-3 (b)(5).

(i) The Secretary of the military department concerned is authorized, without power of redelegation, to make a domestic nonavailability determination that applies to only one contract. The supporting documentation for the determination shall include an analysis and written documentation by the requiring activity, with specificity, why alternatives that would not require a domestic nonavailability determination are unacceptable.

(ii) A domestic nonavailability determination that applies to more than one contract (i.e., a class domestic nonavailability determination), requires the approval of the USD(A&S).

(A) At least 30 days before making a domestic nonavailability determination that would apply to more than one contract, the USD(A&S) will, to the maximum extent practicable, and in a manner consistent with the protection of national security and confidential business information—

(1) Publish a notice on the in the Governmentwide point of entry (GPE) ( https://www.sam.gov) of the intent to make the domestic nonavailability determination; and

(2) Solicit information relevant to such notice from interested parties, including producers of specialty metal mill products.

(B) The USD(A&S)—

(1) Will take into consideration all information submitted in response to the notice in making a class domestic nonavailability determination;

(2) May consider other relevant information that cannot be made part of the public record consistent with the protection of national security information and confidential business information; and

(3) Will ensure that any such domestic nonavailability determination and the rationale for the determination are made publicly available to the maximum extent consistent with the protection of national security and confidential business information.

(6) End items containing a minimal amount of otherwise noncompliant specialty metals (i.e., specialty metals not melted or produced in the United States that are not covered by another exception listed in this paragraph (b)), if the total weight of noncompliant specialty metal does not exceed 2 percent of the total weight of all specialty metal in the end item. This exception does not apply to high performance magnets containing specialty metals. See PGI 225.7003-3 (b)(6) for a table of applicability of specialty metals restrictions to magnets.

(c) Compliance for commercial derivative military articles. The restrictions at 225.7003-2 (a) do not apply to an item acquired under a prime contract if—

(1) The offeror has certified, and subsequently demonstrates, that the offeror and its subcontractor(s) will individually or collectively enter into a contractual agreement or agreements to purchase a sufficient quantity of domestically melted or produced specialty metal in accordance with the provision at 252.225-7010 ; and

(2) The USD(A&S), or the Secretary of the military department concerned, determines that the item is a commercial derivative military article (defense agencies see procedures at PGI 225.7003-3 (c)). The contracting officer shall submit the offeror’s certification and a request for a determination to the appropriate official, through agency channels, and shall notify the offeror when a decision has been made.

(d) National security waiver. The USD(A&S) may waive the restrictions at 225.7003-2 if the USD(A&S) determines in writing that acceptance of the item is necessary to the national security interests of the United States (see procedures at PGI 225.7003-3 (d)). This authority may not be delegated.

(1) The written determination of the USD(A&S)—

(i) Shall specify the quantity of end items to which the national security waiver applies;

(ii) Shall specify the time period over which the national security waiver applies; and

(iii) Shall be provided to the congressional defense committees before the determination is executed, except that in the case of an urgent national security requirement, the determination may be provided to the congressional defense committees up to 7 days after it is executed.

(2) After making such a determination, the USD(A&S) will—

(i) Ensure that the contractor or subcontractor responsible for the noncompliant specialty metal develops and implements an effective plan to ensure future compliance; and

(ii) Determine whether or not the noncompliance was knowing and willful. If the USD(A&S) determines that the noncompliance was knowing and willful, the appropriate debarring and suspending official shall consider suspending or debarring the contractor or subcontractor until such time as the contractor or subcontractor has effectively addressed the issues that led to the noncompliance.

(3) Because national security waivers will only be granted when the acquisition in question is necessary to the national security interests of the United States, the requirement for a plan will be applied as a condition subsequent, and not a condition precedent, to the granting of a waiver.

(a) Unless the acquisition is wholly exempt from the specialty metals restrictions at 225.7003-2 because the acquisition is covered by an exception in 225.7003-3 (a) or (d) (but see paragraph (d) of this section)—

(1) Use the clause at 252.225-7008 , Restriction on Acquisition of Specialty Metals, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial product, that—

(i) Exceed the simplified acquisition threshold; and

(ii) Require the delivery of specialty metals as end items.

(2) Use the clause at 252.225-7009 , Restriction on Acquisition of Certain Articles Containing Specialty Metals, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial products and commercial services, that—

(i) Exceed the simplified acquisition threshold; and

(ii) Require delivery of any of the following items, or components of the following items, if such items or components contain specialty metal:

(A) Aircraft.

(B) Missile or space systems.

(C) Ships.

(D) Tank or automotive items.

(E) Weapon systems.

(F) Ammunition.

(b) Use the provision at 252.225-7010 , Commercial Derivative Military Article—Specialty Metals Compliance Certificate, in solicitations, including solicitations using FAR part 12 procedures for the acquisition of commercial items,—

(1) That contain the clause at 252.225-7009 ; and

(2) For which the contracting officer anticipates that one or more offers of commercial derivative military articles may be received.

(c) If an agency cannot reasonably determine at time of acquisition whether some or all of the items will be used in support of combat operations or in support of contingency operations, the contracting officer should not rely on the exception at 225.7003-3 (a)(2) or (3), but should include the appropriate specialty metals clause or provision in the solicitation and contract.

(d) If the solicitation and contract require delivery of a variety of contract line items containing specialty metals, but only some of the items are subject to domestic specialty metals restrictions, identify in the Schedule those items that are subject to the restrictions.

This section implements 10 U.S.C. 4864.

As used in this section—

“National technology and industrial base” means the persons and organizations that are engaged in production activities conducted within the United States, Australia, Canada, New Zealand, and the United Kingdom of Great Britain and Northern Ireland (United Kingdom). (10 U.S.C. 4801)

“Star tracker” means a navigational tool used in a satellite weighing more than 400 pounds whose principal purpose is to support the national security, defense, or intelligence needs of the U.S. Government.

Except as provided in 225.7004-3, do not acquire any of the following items, either as end products or components, unless the manufacturer of the items is part of the national technology and industrial base:

(a) Buses, if multipassenger motor vehicles are purchased, leased, rented, or made available under contracts for transportation services.

(b) Components for naval vessels, to the extent they are unique to marine applications (see also 225.7004-4 for implementation of the restriction for naval vessels):

(1) Gyrocompasses.

(2) Electronic navigation chart systems.

(3) Steering controls.

(4) Propulsion and machinery control systems.

(5) Totally enclosed lifeboats.

(6) Welded shipboard anchor and mooring chain. See also 225.7004-5.

(c) Large medium-speed diesel engines for new construction of auxiliary ships using funds available for National Defense Sealift Fund programs or Shipbuilding and Conversion, Navy.

(d) For T-AO 205 and T-ARC class vessels:

(1) Auxiliary equipment, including pumps, for all shipboard services.

(2) Propulsion system components, including engines, reduction gears, and propellers.

(3) Shipboard cranes.

(4) Spreaders for shipboard cranes.

(e) Star trackers.

(a) Contracts under the simplified acquisition threshold. The restrictions at 225.7004-2 do not apply to a contract or subcontract that does not exceed the simplified acquisition threshold.

(b) Buses. The restriction at 225.7004-2(a) does not apply in the following circumstances:

(1) Buses manufactured outside the national technology and industrial base are needed for temporary use because buses manufactured in the national technology and industrial base are not available to satisfy requirements that cannot be postponed. Such use may not, however, exceed the lead time required for acquisition and delivery of buses manufactured in the national technology and industrial base.

(2) The requirement for buses is temporary in nature. For example, to meet a special, nonrecurring requirement or a sporadic and infrequent recurring requirement, buses manufactured outside the national technology and industrial base may be used for temporary periods of time. Such use may not however, exceed the period of time needed to meet the special requirement.

(3) Buses manufactured outside the national technology and industrial base are available at no cost to the U.S. Government.

(c) Components for naval vessels. The restriction at 225.7004-2(b) does not apply to acquisition of spare or repair parts needed to support components for naval vessels manufactured outside the United States. Support includes the purchase of spare gyrocompasses, electronic navigation chart systems, steering controls, propulsion and machinery control systems, totally enclosed lifeboats, and welded shipboard anchor and mooring chain.

(d) Components for auxiliary ships. The restriction at 225.7004-2(c) does not apply to large medium-speed engines for icebreakers or special mission ships.

(e) Star trackers. The restriction at 225.7004-2(e) does not apply to acquisition programs that have received Milestone A approval as defined in 10 U.S.C. 4211 before October 1, 2021, as documented by the requiring activity official performing program management responsibilities. The contracting officer shall include the Milestone A approval documentation in the contract file.

(a) The statute at 10 U.S.C. 4864(h) prohibits the use of contract clauses or certifications to implement the restriction at 225.7004-2(b) for naval vessel components.

(b) Agencies shall accomplish implementation of the restriction at 225.7004-2(b) through use of management and oversight techniques that achieve the objectives of this section without imposing a significant management burden on the Government or the contractor involved.

(a) In accordance with section 8041 of the Fiscal Year 1991 DoD Appropriations Act (Pub. L. 101-511) and similar sections in subsequent DoD appropriations acts, do not acquire welded shipboard anchor and mooring chain, unless—

(1) It is manufactured in the United States, including cutting, heat treating, quality control, testing, and welding (both forging and shot blasting process); and

(2) The cost of the components manufactured in the United States exceeds 50 percent of the total cost of components.

(b) The statute at 10 U.S.C. 4864 also restricts acquisition of welded shipboard anchor and mooring chain, when used as a component of a naval vessel; however, the Appropriations Act restriction described in paragraph (a) of this section takes precedence over the restriction of 10 U.S.C. 4864 cited in 225.7004-2(b)(6).

(a) Welded shipboard anchor and mooring chain.

(1) In accordance with section 8016 of the Consolidated Appropriations Act, 2023 (Pub. L. 117-328), the secretary of the department responsible for acquisition may waive the restrictions in 225.7004-2(b)(6) and 225.7004-5, on a case-by-case basis, if—

(i) Sufficient domestic suppliers are not available to meet DoD requirements on a timely basis; and

(ii) The acquisition is necessary to acquire capability for national security purposes.

(2) Document the waiver in a written determination and findings containing—

(i) The factors supporting the waiver; and

(ii) A certification that the acquisition must be made in order to acquire capability for national security purposes.

(3) Provide a copy of the determination and findings to the House and Senate Committees on Appropriations.

(b) Star trackers. The waiver criteria at paragraph (c) of this section apply, except that the USD(A&S) may delegate the authority to waive a restriction for a star tracker for a particular foreign country to the service acquisition executive, without power of redelegation (section 1603, National Defense Authorization Act for Fiscal Year 2021 (Pub. L. 116-283)).

(c) Waiver of restrictions of 10 U.S.C. 4864(a). The restrictions on certain foreign purchases at 225.7004-2 may be waived, except as provided in paragraphs (a) and (b) of this section, as follows:

(1)(i) USD(A&S), without power of delegation, may waive a restriction for a particular item for a particular foreign country upon determination that—

(A) U.S. producers of the item would not be jeopardized by competition from a foreign country, and that country does not discriminate against defense items produced in the United States to a greater degree than the United States discriminates against defense items produced in that country; or

(B) Application of the restriction would impede cooperative programs entered into between DoD and a foreign country, or would impede the reciprocal procurement of defense items under a memorandum of understanding providing for reciprocal procurement of defense items under 225.872, and that country does not discriminate against defense items produced in the United States to a greater degree than the United States discriminates against defense items produced in that country.

(ii) A notice of the determination to exercise the waiver authority shall be published in the Federal Register and submitted to the congressional defense committees at least 15 days before the effective date of the waiver.

(iii) The effective period of the waiver shall not exceed 1 year.

(iv) For contracts entered into prior to the effective date of a waiver, provided adequate consideration is received to modify the contract, the waiver shall be applied as directed or authorized in the waiver to—

(A) Subcontracts entered into on or after the effective date of the waiver; and

(B) Options for the procurement of items that are exercised after the effective date of the waiver, if the option prices are adjusted for any reason other than the application of the waiver.

(2) The head of the contracting activity may waive a restriction on a case-by-case basis upon execution of a determination and findings that any of the following applies:

(i) The restriction would cause unreasonable delays.

(ii) Satisfactory quality items manufactured in the national technology and industrial base are not available.

(iii) Application of the restriction would result in the existence of only one source for the item in the national technology and industrial base.

(iv) Application of the restriction is not in the national security interests of the United States.

(v) Application of the restriction would adversely affect a U.S. company.

(3) A restriction is waived when it would cause unreasonable costs. The cost of an item of national technology and industrial base origin is unreasonable if it exceeds 150 percent of the offered price, inclusive of duty, of items that are not of national technology and industrial base origin.

(a) Unless a waiver has been granted, use the clause at 252.225-7019, Restriction on Acquisition of Anchor and Mooring Chain, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial products and commercial services, that exceed the simplified acquisition threshold and that require welded shipboard anchor or mooring chain.

(b) Use the clause at 252.225-7062, Restriction on Acquisition of Large Medium-Speed Diesel Engines, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial products and commercial services, that exceed the simplified acquisition threshold and that require large medium-speed diesel engines for new construction of auxiliary ships using funds available for National Defense Sealift Fund programs or Shipbuilding and Conversion, Navy unless—

(1) An exception at 225.7004-3(d) applies; or

(2) A waiver has been granted.

(c) Unless a waiver has been granted, use the clause at 252.225-7063, Restriction on Acquisition of Components of T–AO 205 and T-ARC Class Vessels, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial products and commercial services, that exceed the simplified acquisition threshold and that require components of T-AO 205 and T-ARC class vessels.

(d) Use the clause at 252.225-7064, Restriction on Acquisition of Certain Satellite Components, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial products and commercial services, that exceed the simplified acquisition threshold unless—

(1) An exception at 225.7004-3(e) applies; or

(2) A waiver has been granted.

This section implements section 8065 of the Fiscal Year 2002 DoD Appropriations Act (Pub. L. 107-117) and the same restriction in subsequent DoD appropriations acts.

(a) Do not acquire ball and roller bearings unless—

(1) The bearings are manufactured in the United States or Canada; and

(2) For each ball or roller bearing, the cost of the bearing components manufactured in the United States or Canada exceeds 50 percent of the total cost of the bearing components of that ball or roller bearing.

(b) The restriction at 225.7003-2 may also apply to bearings that are made from specialty metals, such as high carbon chrome steel (bearing steel).

The restriction in 225.7009-2 does not apply to contracts or subcontracts for the acquisition of commercial products, except for commercial ball and roller bearings acquired as end items.

The Secretary of the department responsible for acquisition or, for the Defense Logistics Agency, the Component Acquisition Executive, may waive the restriction in 225.7009-2 , on a case-by-case basis, by certifying to the House and Senate Committees on Appropriations that—

(a) Adequate domestic supplies are not available to meet DoD requirements on a timely basis; and

(b) The acquisition must be made in order to acquire capability for national security purposes.

Use the clause at 252.225-7016 , Restriction on Acquisition of Ball and Roller Bearings, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial products and commercial services, unless—

(a) The items being acquired are commercial products other than ball or roller bearings acquired as end items;

(b) The items being acquired do not contain ball and roller bearings; or

(c) A waiver has been granted in accordance with 225.7009-4 .

(a) In accordance with Section 8111 of the Fiscal Year 1992 DoD Appropriations Act (Pub. L. 102-172) and similar sections in subsequent DoD appropriations acts, do not acquire any of the following types of carbon, alloy, or armor steel plate for use in a Government-owned facility or a facility under the control of (e.g., leased by) DoD, unless it is melted and rolled in the United States or Canada:

(1) Carbon, alloy, or armor steel plate in Federal Supply Class 9515.

(2) Carbon, alloy, or armor steel plate described by specifications of the American Society for Testing Materials or the American Iron and Steel Institute.

(b) This restriction—

(1) Applies to the acquisition of carbon, alloy, or armor steel plate as a finished steel mill product that may be used “as is” or may be used as an intermediate material for the fabrication of an end product; and

(2) Does not apply to the acquisition of an end product (e.g., a machine tool), to be used in the facility, that contains carbon, alloy, or armor steel plate as a component.

The Secretary of the department responsible for acquisition may waive this restriction, on a case-by-case basis, by certifying to the House and Senate Committees on Appropriations that—

(a) Adequate U.S. or Canadian supplies are not available to meet DoD requirements on a timely basis; and

(b) The acquisition must be made in order to acquire capability for national security purposes.

Unless a waiver has been granted, use the clause at 252.225-7030 , Restriction on Acquisition of Carbon, Alloy, and Armor Steel Plate, in solicitations and contracts that—

(a) Require the delivery to the Government of carbon, alloy, or armor steel plate that will be used in a Government-owned facility or a facility under the control of DoD; or

(b) Require contractors operating in a Government-owned facility or a facility under the control of DoD to purchase carbon, alloy, or armor steel plate.

In accordance with Section 8112 of Pub. L. 100-202, and similar sections in subsequent DoD appropriations acts, do not purchase a supercomputer unless it is manufactured in the United States.

The Secretary of Defense may waive this restriction, on a case-by-case basis, after certifying to the Armed Services and Appropriations Committees of Congress that—

(a) Adequate U.S. supplies are not available to meet requirements on a timely basis; and

(b) The acquisition must be made in order to acquire capability for national security purposes.

Unless a waiver has been granted, use the clause at 252.225-7011 , Restriction on Acquisition of Supercomputers, in solicitations and contracts for the acquisition of supercomputers.

This section implements 10 U.S.C. 8679 and 10 U.S.C. 8680.

As used in this section—

“Corrective and preventive maintenance or repair” means—

(1) Maintenance or repair actions performed as a result of a failure in order to return or restore equipment to acceptable performance levels; and

(2) Scheduled maintenance or repair actions to prevent or discover functional failures.

“Facilities maintenance” means the effort required to—

(1) Provide housekeeping services throughout the ship;

(2) Perform coating maintenance and repair to exterior and interior surfaces due to normal environmental conditions; and

(3) Clean mechanical spaces, mission zones, and topside spaces.

(a) Contract award (10 U.S.C. 8679). Do not award a contract to construct in a foreign shipyard—

(1) A vessel for any of the armed forces; or

(2) A major component of the hull or superstructure of a vessel for any of the armed forces.

(b) Overhaul, repair, or maintenance (10 U.S.C. 8680).

(1) Do not overhaul, repair, or maintain, in a shipyard,outside the United States or Guam, a naval vessel (or any other vessel under the jurisdiction of the Secretary of the Navy) homeported in the United States or Guam.

(2) This restriction on overhaul, repair, or maintenance does not apply to—

(i) Voyage repairs; or

(ii) Repairs necessary to correct damage sustained due to hostile actions or interventions.

(3) For a naval vessel classified as a littoral combat ship and operating on deployment—

(i) Corrective and preventive maintenance or repair, whether intermediate or depot level, and facilities maintenance may be performed if the work is performed by U.S. Government personnel or U.S. contractor personnel—

(A) In a foreign shipyard;

(B) At a facility outside of a foreign shipyard; or

(C) At any other facility convenient to the vessel;

(ii) Foreign workers may be used to perform corrective and preventive maintenance or repair, only if the Secretary of the Navy, without power of delegation, determines that travel by U.S. Government or contractor personnel to perform the maintenance or repair is not advisable for health or safety reasons; and

(iii) Foreign contractors may perform facilities maintenance only as approved by the Secretary of the Navy.

“Caribbean Basin country photovoltaic device” means a photovoltaic device that—

(1) Is wholly manufactured in a Caribbean Basin country; or

(2) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of a Caribbean Basin country.

“Covered contract” means an energy savings performance contract, a utility services contract, or a private housing contract awarded by DoD, to be performed in the United States, if such contract results in DoD ownership of photovoltaic devices, by means other than DoD purchase as end products. DoD is deemed to own a photovoltaic device if the device is—

(1) Installed in the United States on DoD property or in a facility owned by DoD; and

(2) Reserved for the exclusive use of DoD in the United States for the full economic life of the device.

“Designated country photovoltaic device” means a World Trade Organization Government Procurement Agreement (WTO GPA) country photovoltaic device, a Free Trade Agreement country photovoltaic device, a least developed country photovoltaic device, or a Caribbean Basin country photovoltaic device.

“Domestic photovoltaic device” means a photovoltaic device that is manufactured in the United States.

“Foreign photovoltaic device” means a photovoltaic device other than a domestic photovoltaic device.

“Free Trade Agreement country photovoltaic device” means a photovoltaic device that—

(1) Is wholly manufactured in a Free Trade Agreement country; or

(2) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of a Free Trade Agreement country.

“Least developed country photovoltaic device” means a photovoltaic device that—

(1) Is wholly manufactured in a least developed country; or

(2) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been substantially transformed in a least developed country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of a least developed country.

"Photovoltaic device" means a device that converts light directly into electricity through a solid-state, semiconductor process.

“Qualifying country photovoltaic device” means a photovoltaic device manufactured in a qualifying country.

“U.S.-made photovoltaic device” means a photovoltaic device that—

(1) Is manufactured in the United States; or

(2) Is substantially transformed in the United States into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of the United States.

“WTO GPA country photovoltaic device” means a photovoltaic device that—

(1) Is wholly manufactured in a WTO GPA country; or

(2) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of a WTO GPA country.

In accordance with section 846 of the National Defense Authorization Act for Fiscal Year 2011, photovoltaic devices provided under any covered contract shall comply with 41 U.S.C. chapter 83, Buy American, subject to the exceptions to that statute provided in the Trade Agreements Act of 1979 (19 U.S.C. 2501 et seq.).

DoD requires the contractor to utilize domestic photovoltaic devices in covered contracts that exceed the simplified acquisition threshold, with the following exceptions:

(a) Qualifying country.Qualifying country photovoltaic devices may be utilized in any covered contract, because 225.103 (a)(i)(A) provides an exception to the Buy American statute for products of qualifying countries, as defined in 225.003 .

(b) Buy American—unreasonable cost. For a covered contract that utilizes photovoltaic devices valued at less than $174,000, the exception for unreasonable cost may apply (see FAR 25.103(c)). If the cost of a foreign photovoltaic device plus 50 percent is less than the cost of a domestic photovoltaic device, then the foreign photovoltaic device may be utilized.

(c) Trade agreements.

(1) Free Trade Agreements. For a covered contract that utilizes photovoltaic devices , photovoltaic devices may be utilized from a country covered under the acquisition by a Free Trade Agreement, depending upon dollar threshold (see FAR subpart 25.4).

(2) World Trade Organization—Government Procurement Agreement. For covered contracts that utilize photovoltaic devices that are valued at $174,000 or more, only U.S.-made photovoltaic devices, designated country photovoltaic devices, or qualifying country photovoltaic devices may be utilized.

(a)(1) Use the clause at 252.225-7017 , Photovoltaic Devices, in solicitations, including solicitations using FAR part 12 procedures for the acquisition of commercial products and commercial services, for a contract expected to exceed the simplified acquisition threshold that may be a covered contract, i.e., an energy savings performance contract, a utility service contract, or a private housing contract awarded by DoD, if such contract will result in DoD ownership of photovoltaic devices, by means other than DoD purchase as end products.

(2) Use the clause in the resultant contract, including contracts using FAR part 12 procedures for the acquisition of commercial products and commercial services, if it is a covered contract.

(b) Use the provision at 252.225-7018 , Photovoltaic Devices—Certificate, in solicitations, including solicitations using FAR part 12 procedures for the acquisition of commercial products and commercial services, that contain the clause at 252.225-7017 .

This section implements 10 U.S.C. 4872.

As used in this section—

“Covered material” means— 

(1) Samarium-cobalt magnets;

(2) Neodymium-iron-boron magnets;

(3) Tantalum metals and alloys;

( 4 ) Tungsten metal powder; and

( 5 ) Tungsten heavy alloy or any finished or semi-finished component containing tungsten heavy alloy.

“Electronic device” means an item that operates by controlling the flow of electrons or other electrically charged particles in circuits, using interconnections such as resistors, inductors, capacitors, diodes, switches, transistors, or integrated circuits.

“Tungsten heavy alloy” means a tungsten base pseudo alloy that—

(1) Meets the specifications of ASTM B777 or SAE-AMS-T-21014 for a particular class of tungsten heavy alloy; or

(2) Contains at least 90 percent tungsten in a matrix of other metals (such as nickel-iron or nickel-copper) and has density of at least 16.5 g/cm3).

(a) General. Except as provided in 225.7018-3 and 225.7018-4 —

(1) Effective through December 31, 2026, do not acquire any covered material melted or produced in any covered country, or any end item, manufactured in any covered country, that contains a covered material; and

(2) Effective January 1, 2027, do not acquire any covered material mined, refined, separated, melted, or produced in any covered country, or any end item, manufactured in any covered country, that contains a covered material. (Section 854, Pub. L. 118-31; 10 U.S.C. 4872.)

(b) Samarium-cobalt magnets and neodymium-iron-boron magnets.

(1) Effective through December 31, 2026, for samarium-cobalt magnets and neodymium-iron-boron magnets, this restriction includes -

(i) Melting samarium with cobalt to produce the samarium-cobalt alloy or melting neodymium with iron and boron to produce the neodymium-iron-boron alloy; and

(ii) All subsequent phases of production of the magnets, such as powder formation, pressing, sintering or bonding, and magnetization.

(2) Effective January 1, 2027, for samarium-cobalt magnets this restriction includes the entire supply chain from mining or production of a cobalt and samarium ore or feedstock, including recycled material, through production of finished magnets, except as provided at 225.7018-3.

(4) Effective January 1, 2027, for neodymium-iron-boron magnets, this restriction includes the entire supply chain from mining of neodymium, iron, and boron through production of finished magnets, except as provided at 225.7018-3.

(c) Tantalum metals and alloys.

(1) Effective through December 31, 2026, for production of tantalum metals of any kind and alloys, this restriction includes the reduction or melting of any form of tantalum to create tantalum metal including unwrought, powder, mill products, and alloys. The restriction also covers all subsequent phases of production of tantalum metals and alloys.

(2) Effective January 1, 2027, for production of tantalum metals of any kind and alloys, this restriction includes mining or production of a tantalum ore or feedstock, including recycled material, through production of metals of any kind and alloys, except as provided at 225.7018-3.

(d) Tungsten metal powder and tungsten heavy alloy.

(1) Effective through December 31, 2026, for production of tungsten metal powder and tungsten heavy alloy, this restriction includes–

(i) Atomization;

(ii) Calcination and reduction into powder;

(iii) Final consolidation of non-melt derived metal powders; and

(iv) All subsequent phases of production of tungsten metal powder, tungsten heavy alloy, or any finished or semi-finished component containing tungsten heavy alloy.

(2) Effective January 1, 2027, for production of tungsten metal powder, tungsten heavy alloy, or any finished or semi-finished component containing tungsten heavy alloy, this restriction includes mining or production of a tungsten ore or feedstock, including recycled material, through production of tungsten metal powders, except as provided at 225.7018-3.

The restriction in section 225.7018-2 does not apply to an acquisition—

(a) At or below the simplified acquisition threshold;

(b) Outside the United States of an item for use outside the United States; or

(c) Of an end item containing a covered material that is—

(1) A commercially available off-the-shelf item (but see PGI 225.7018-3 (c)(1) with regard to commercially available samarium-cobalt magnets), other than—

(i) A commercially available off-the-shelf item that is—

(A) 50 percent or more tungsten by weight; or

(B) 50 percent or more covered material by weight effective January 1, 2027;

(ii) Effective through December 31, 2026, a tantalum metal, tantalum alloy, or tungsten heavy alloy mill product, such as bar, billet, slab, wire, cube, sphere, block, blank, plate, or sheet, that has not been incorporated into an end item, subsystem, assembly, or component; or

(iii) Effective January 1, 2027, a covered material that is a mill product, such as bar, billet, slab, wire, cube, sphere, block, blank, plate, or sheet, that has not been incorporated into an end item, subsystem, assembly, or component;

(2) An electronic device, unless the Secretary of Defense, upon the recommendation of the Strategic and Critical Materials Board of Directors pursuant to 50 U.S.C. 98h-1 determines that the domestic availability of a particular electronic device is critical to national security (but see PGI 225.7018-3 (c)(2) with regard to samarium-cobalt magnets used in electronic components); or

(3) A neodymium-iron-boron magnet manufactured from recycled material if the milling of the recycled material and sintering of the final magnet takes place in the United States.

(d) If the authorized agency official concerned, as specified in 225.7018-4, determines that compliant covered materials of satisfactory quality and quantity, in the required form, cannot be procured as and when needed at a reasonable price.

(1) For tantalum metal, tantalum alloy, or tungsten heavy alloy, the term “required form” refers to the form of the mill product, such as bar, billet, wire, slab, plate, or sheet, in the grade appropriate for the production of a finished end item to be delivered to the Government under the contract; or a finished component assembled into an end item to be delivered to the Government under the contract.

(2) For samarium-cobalt magnets or neodymium-iron-boron magnets, the term “required form” refers to the form and properties of the magnets.

(a) Individual nonavailability determinations.

(1) The head of the contracting activity is authorized to make a nonavailability determination described in 225.7018-3 (d) on an individual basis (i.e., applies to only one contract).

(2) The supporting documentation for the determination shall include an analysis and written certification by the requiring activity that describes, with specificity, why alternatives that would not require a nonavailability determination are unacceptable. The template for an individual nonavailability determination is available at PGI 225.7018-4(a)(2).

(3) Provide to USD(A&S) DASD (Industrial Policy), in accordance with the procedures at PGI 225.7018-4 (a)(4)—

(i) A copy of individual nonavailability determinations with supporting documentation; and

(ii) Notification when individual nonavailability determinations are requested, but denied.

(b) Class nonavailability determinations. A class nonavailability determination (i.e., a nonavailability determinations that applies to more than one contract) requires the approval of the USD(A&S). Follow the procedures at PGI 225.7018-4 (b) when submitting a request for a class nonavailability determination.

(1) At least 30 days before making a nonavailability determination that would apply to more than one contract, the USD(A&S) will, to the maximum extent practicable, and in a manner consistent with the protection of national security and confidential business information—

(i) Publish a notice in the GPE ( https://www.sam.gov) of the intent to make the nonavailability determination; and

(ii) Solicit information relevant to such notice from interested parties, including producers of mill products from covered materials.

(2) The USD(A&S)—

(i) Will take into consideration all information submitted in response to the notice in making a class nonavailability determination;

(ii) May consider other relevant information that cannot be made part of the public record consistent with the protection of national security information and confidential business information; and

(iii) Will ensure that any such nonavailability determination and the rationale for the determination are made publicly available to the maximum extent consistent with the protection of national security and confidential business information.

Unless acquiring items outside the United States for use outside the United States or a nonavailability determination has been made in accordance with 225.7018-4 , use the clause at 252.225-7052 , Restriction on Acquisition of Certain Magnets, Tantalum, and Tungsten, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial products and commercial services, that exceed the simplified acquisition threshold.

As used in this section—

Covered military installation means a military installation in Europe identified by DoD as a main operating base.

Furnished energy means energy furnished to a covered military installation in any form and for any purpose, including heating, cooling, and electricity.

Main operating base means a facility outside the United States and its territories with permanently stationed operating forces and robust infrastructure.

In accordance with section 2821 of the National Defense Authorization Act for Fiscal Year 2020 ( Pub. L. 116-92), contracts for the acquisition of furnished energy for a covered military installation shall not use any energy sourced from inside the Russian Federation as a means of generating the furnished energy for the covered military installation. The prohibition—

(a) Applies to all forms of energy that are furnished to a covered military installation; and

(b) Does not apply to energy converted by a third party into another form of energy and not directly delivered to a covered military installation.

(a) Request and approval of waiver. The requiring activity may submit to the contracting activity a request for waiver of the prohibition in 225.7019-2 Prohibition. for a specific contract for the acquisition of furnished energy for a covered military installation. The head of the contracting activity, without power of redelegation, may approve the waiver, upon certification to the congressional defense committees that—

(1) The waiver of section 2821 is necessary to ensure an adequate supply of furnished energy for the covered military installation; and

(2) National security requirements have been balanced against the potential risk associated with reliance upon the Russian Federation for furnished energy.

(b)Submission of waiver notice. (1) Not later than 14 days before the execution of any energy contract for which a waiver is granted under paragraph (a) of this section, the head of the contracting activity shall submit to the congressional defense committees a notice of the waiver. See PGI 225.7019-3 for waiver procedures.

(2) The waiver notice shall include the following:

(i) The rationale for the waiver, including the basis for the certifications required by paragraph (a) of this section.

(ii) An assessment of how the waiver may impact DoD's European energy resilience strategy.

(iii) An explanation of the measures DoD is taking to mitigate the risk of using Russian Federation furnished energy.

Unless a waiver has been granted in accordance with 225.7019-3 Waiver.—

(a) Use the provision at 252.225-7053 Representation Regarding Prohibition on Use of Certain Energy Sourced from Inside the Russian Federation., Representation Regarding Prohibition on Use of Certain Energy Sourced from Inside the Russian Federation, in solicitations, including solicitations using FAR part 12 procedures for the acquisition of commercial products and commercial services and solicitations at or below the simplified acquisition threshold, that are for the acquisition of furnished energy for a covered military installation; and

(b) Use the clause at 252.225-7054 Prohibition on Use of Certain Energy Sourced from Inside the Russian Federation., Prohibition on Use of Certain Energy Sourced from Inside the Russian Federation, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial products and commercial services and solicitations and contracts at or below the simplified acquisition threshold, that are for the acquisition of furnished energy for a covered military installation.

As used in this section—

Agency or instrumentality of the government of Venezuela means an agency or instrumentality of a foreign state as defined in 28 U.S.C. 1603(b), with each reference in section 1603(b) to a foreign state deemed to be a reference to Venezuela.

Business operations means engaging in commerce in any form, including acquiring, developing, maintaining, owning, selling, possessing, leasing, or operating equipment, facilities, personnel, products, services, personal property, real property, or any other apparatus of business or commerce.

Government of Venezuela means the government of any political subdivision of Venezuela, and any agency or instrumentality of the government of Venezuela.

Person means—

(1) A natural person, corporation, company, business association, partnership, society, trust, or any other nongovernmental entity, organization, or group;

(2) Any governmental entity or instrumentality of a government, including a multilateral development institution (as defined in section 1701(c)(3) of the International Financial Institutions Act (22 U.S.C. 262r(c)(3)); and

(3) Any successor, subunit, parent entity, or subsidiary of, or any entity under common ownership or control with, any entity described in paragraph (1) or (2) of this definition.

In accordance with section 890 of the National Defense Authorization Act for Fiscal Year 2020 (Pub. L. 116-92), DoD is prohibited from entering into a contract for the procurement of products or services with any person that has business operations with an authority of the government of Venezuela that is not recognized as the legitimate government of Venezuela by the U.S. Government, except as provided in 225.7020-3 or 225.7020-4.

The prohibition in 225.7020-2 does not apply if—

(a) The person has a valid license to operate in Venezuela issued by the Office of Foreign Assets Control of the Department of the Treasury; or

(b) The acquisition is related to the operation and maintenance of the U.S. Government’s consular office and diplomatic posts in Venezuela.

(a) The prohibition in section 225.7020-2 does not apply to an acquisition jointly determined by the Secretary of Defense and Secretary of State, without power of redelegation, to be—

(1) Necessary for purposes of—

(i) Providing humanitarian assistance to the people of Venezuela;

(ii) Disaster relief and other urgent lifesaving measures; or

(iii) Carrying out noncombatant evacuations; or

(2) Vital to the national security interests of the United States.

(b) Follow the procedures at 225.7020-4(b) when entering into a contract on the basis of a joint determination.

(a) Use the provision at 252.225-7055, Representation Regarding Business Operations with the Maduro Regime, in solicitations, including solicitations using FAR part 12 procedures for the acquisition of commercial products and commercial services, that include the clause at 252.225-7056, Prohibition Regarding Business Operations with the Maduro Regime.

(b) Unless the exception at 225.7020-3(b) applies or a joint determination has been made in accordance with 225.7020-4, use the clause at 252.225-7056, Prohibition Regarding Business Operations with the Maduro Regime, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial products and commercial services.

As used in this section—

"Covered contract" means any DoD contract or subcontract with a value in excess of $5 million, not including contracts for commercial products and commercial services.

"Covered entity" means any corporation, company, limited liability company, limited partnership, business trust, business association, or other similar entity, including any subsidiary thereof, performing work on a covered contract in the People’s Republic of China, including by leasing or owning real property used in the performance of the covered contract in the People’s Republic of China.

In accordance with section 855 of the National Defense Authorization Act for Fiscal Year 2022 (Pub. L. 117-81, 10 U.S.C. 4651 note prec.), do not award, extend, or exercise an option on a covered contract unless a covered entity has submitted each required disclosure.

The senior procurement executive (SPE) may waive the disclosure requirements at 225.7021-2 if the SPE determines in writing that such disclosure would not be in the national security interests of the United States. This authority may not be delegated. See PGI 225.7021-3 for procedures and content requirements regarding the SPE’s written determination.

(a) Use the provision at 252.225-7057, Preaward Disclosure of Employment of Individuals Who Work in the People’s Republic of China, in solicitations that include the clause at 252.225-7058.

(b) Unless a waiver has been granted, use the clause at 252.225-7058, Postaward Disclosure of Employment of Individuals Who Work in the People’s Republic of China, in solicitations and contracts with an estimated value in excess of $5 million.

This section implements section 855 of the National Defense Authorization Act for Fiscal Year 2023 (Pub. L. 117-263) and 10 U.S.C. 4661.

As used in this section—

“Forced labor” means any work or service that is exacted from any person under the menace of any penalty for nonperformance and that the worker does not offer to perform voluntarily (10 U.S.C. 2496).

“XUAR” means the Xinjiang Uyghur Autonomous Region of the People’s Republic of China (10 U.S.C. 2496).

Contracting officers shall not award a contract utilizing funds appropriated or otherwise made available for any fiscal year for any products mined, produced, or manufactured wholly or in part by forced labor from XUAR or from an entity that has used labor from within or transferred from XUAR as part of any forced labor programs, unless an exception applies.

The prohibition at 225.7022-3 does not apply to—

(a) Purchases under the micro-purchase threshold made using the Governmentwide commercial purchase card; or

(b) Purchases using the SF 44 in accordance with 213.306.

(a) Use the provision at 252.225-7059, Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region—Representation, in solicitations, including solicitations using FAR part 12 procedures for the acquisition of commercial products, commercial services, and COTS items, that contain the clause at 252.225-7060, Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.

(b) Use the clause at 252.225-7060, Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region, in solicitations, contracts, and orders for products utilizing funds appropriated or otherwise made available for any fiscal year, including solicitations, contracts, and orders using FAR part 12 procedures for the acquisition of commercial products, commercial services, and COTS items.

As used in this section—

“Covered item” means an article or item of—

(1) Personal protective equipment for use in preventing spread of disease, such as by exposure to infected individuals or contamination or infection by infectious material, including—

(i) Nitrile and vinyl gloves;

(ii) Surgical masks;

(iii) Respirator masks and powered air purifying respirators and required filters;

(iv) Face shields and protective eyewear;

(v) Surgical and isolation gowns and head and foot coverings; or

(vi) Clothing; and

(vii) The materials and components thereof, other than sensors, electronics, or other items added to and not normally associated with such personal protective equipment or clothing; or

(2) Sanitizing and disinfecting wipes, testing swabs, gauze, and bandages.

Except as provided in 225.7023-3, do not acquire a covered item from a covered country in accordance with (10 U.S.C. 4875).

The restriction in section 225.7023-2 does not apply to acquisitions—

(a) Of covered items for use outside of the United States;

(b) At or below $150,000; or

(c)(1) If the head of the contracting activity determines that a covered item of satisfactory quality and quantity, in the required form, cannot be procured as and when needed from nations other than a covered country to meet requirements at a reasonable price.

(2) The contracting officer shall include a copy of any such determination in the contract file.

Unless an exception applies, use the clause at 252.225-7061, Restriction on the Acquisition of Personal Protective Equipment and Certain Other Items from Non-Allied Foreign Nations, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial products, including COTS items, and commercial services, and that—

(a) Are for the acquisition of covered items;

(b) Are for use within the United States; and

(c) Have an estimated value greater than $150,000.

This section implements section 843 of the National Defense Authorization Act for Fiscal Year 2022 ( Pub. L. 117-81), for the acquisition of fuel for overseas contingency operations.

Contracting officers shall not award, for an overseas contingency operation, a contract for fuel, in whole or in part, or derivatives of such fuel, that is sourced from nations or regions prohibited from selling petroleum to the United States. See FAR subpart 25.7 and the Office of Foreign Assets Control website at https://ofac.treasury.gov/​sanctions-programs-and-country-information for prohibited sources.

(a) For contracts for the acquisition of fuel for overseas contingency operations, including contracts using FAR part 12 procedures, expected to exceed the simplified acquisition threshold, the contracting officer—

(1) May request records from the prospective contractor to verify compliance with the following statutes and regulations only when the head of the contracting activity determines in writing that it is necessary:

(i) The Foreign Corrupt Practices Act ( 15 U.S.C. 78dd-1 et seq.).

(ii) International Traffic in Arms Regulations at 22 CFR parts 120 through 130 (see PGI 225.7901-2).

(iii) Export Administration Regulations at 15 CFR parts 730 through 774 (see PGI 225.7901-2).

(iv) Relevant regulations promulgated by the Office of Foreign Assets Control of the Department of the Treasury. Sanction information for specific countries and programs is available at https://ofac.treasury.gov/​sanctions-programs-and-country-information.

(2) To the maximum extent practicable, shall not disqualify an otherwise responsible offeror on the basis of an unsupported denial of access to a facility or equipment by a host-nation government. The provision at 252.225-7065, Restriction on Acquisition of Fuel for Overseas Contingency Operations, requires offerors to report promptly to the contracting officer, prior to award, any instance of unsupported denial of access to a facility or equipment by a host-nation government that may prevent it from complying with the terms and conditions of the solicitation.

(b) See 215.101-71 for the requirement to consider using a tradeoff process.

Use the provision at 252.225-7065, Restriction on Acquisition of Fuel for Overseas Contingency Operations, in solicitations, including solicitations using FAR part 12 procedures for the acquisition of commercial products and commercial services, that are for the acquisition of fuel for overseas contingency operations and are expected to exceed the simplified acquisition threshold.

When acquiring the following forging items, whether as end items or components, acquire items that are of domestic manufacture to the maximum extent practicable:

The policy in 225.7102-1 does not apply to acquisitions—

(a) Using simplified acquisition procedures, unless the restricted item is the end item being purchased;

(b) Overseas for overseas use; or

(c) When the quantity acquired exceeds the amount needed to maintain the U.S. defense mobilization base (provided the excess quantity is an economical purchase quantity). The requirement for domestic manufacture does not apply to the quantity above that required to maintain the base, in which case, qualifying country sources may compete.

Upon request from a contractor, the contracting officer may waive the requirement for domestic manufacture of the items listed in 225.7102-1 .

Use the clause at 252.225-7025 , Restriction on Acquisition of Forgings, in solicitations and contracts, unless—

(a) The supplies being acquired do not contain any of the items listed in 225.7102-1 ; or

(b) An exception in 225.7102-2 applies. If an exception applies to only a portion of the acquisition, specify the excepted portion in the solicitation and contract.

The contracting officer shall coordinate through agency channels with the Principal Director, Defense Pricing, Contracting, and Acquisition Policy, prior to issuing a solicitation for a firm-fixed-price sole source contract type for U.S./FMS combined requirements for a major system that has an estimated contract value that exceeds $500 million. See also 201.170 and PGI 216.403-1 (1)(ii)(B) and (C).

If the contractor has made sales of the item required for the foreign military sale to foreign customers under comparable conditions, including quantity and delivery, price the FMS contract in accordance with FAR Part 15.

(a) In pricing FMS contracts where non-U.S. Government prices as described in 225.7303-1 do not exist, except as provided in 225.7303-5, recognize the reasonable and allocable costs of doing business with a foreign government or international organization, even though such costs might not be recognized in the same amounts in pricing other defense contracts. Examples of such costs include, but are not limited to, the following:

(1) Selling expenses (not otherwise limited by FAR Part 31), such as -

(i) Maintaining international sales and service organizations;

(ii) Sales commissions and fees in accordance with FAR Subpart 3.4;

(iii) Sales promotions, demonstrations, and related travel for sales to foreign governments. Section 126.8 of the International Traffic in Arms Regulations (22 CFR 126.8) may require Government approval for these costs to be allowable, in which case the appropriate Government approval shall be obtained; and

(iv) Configuration studies and related technical services undertaken as a direct selling effort to a foreign country.

(2) Product support and post-delivery service expenses, such as -

(i) Operations or maintenance training, training or tactics films, manuals, or other related data; and

(ii) Technical field services provided in a foreign country related to accident investigations, weapon system problems, or operations/tactics enhancement, and related travel to foreign countries.

(3) Offsets. For additional information see 225.7306.

(i) An offset agreement is the contractual arrangement between the FMS customer and the U.S. defense contractor that identifies the offset obligation imposed by the FMS customer that has been accepted by the U.S. defense contractor as a condition of the FMS customer's purchase. These agreements are distinct and independent of the LOA and the FMS contract. Further information about offsets and LOAs may be found in the Defense Security Cooperation Agency (DSCA) Security Assistance Management Manual (DSCA 5105.38-M), chapter 6, paragraph 6.3.9. (http://samm.dsca.mil/chapter/chapter-6).

(ii) A U.S. defense contractor may recover all costs incurred for offset agreements with a foreign government or international organization if the LOA is financed wholly with foreign government or international organization customer cash or repayable foreign military finance credits.

(iii) The U.S. Government assumes no obligation to satisfy or administer the offset agreement or to bear any of the associated costs.

(iv) Indirect offset costs are deemed reasonable for purposes of FAR parts 15 and 31 with no further analysis necessary on the part of the contracting officer, provided that the U.S. defense contractor submits to the contracting officer a signed offset agreement or other documentation showing that the FMS customer has made the provision of an indirect offset a condition of the FMS acquisition. FMS customers are placed on notice through the LOA that indirect offset costs are deemed reasonable without any further analysis by the contracting officer.

(4) Costs that are the subject of advance agreement under the appropriate provisions of FAR part 31; or where the advance understanding places a limit on the amounts of cost that will be recognized as allowable in defense contract pricing, and the agreement contemplated that it will apply only to DoD contracts for the U.S. Government's own requirement (as distinguished from contracts for FMS).

(b) Costs not allowable under FAR part 31 are not allowable in pricing FMS contracts, except as noted in paragraphs (c) and (e) of this subsection.

(c) The limitations for all contractors described in 231.205-18(c)(iii) and (iv) do not apply to FMS contracts, except as provided in 225.7303-5. The allowability of independent research and development (IR&D) costs and bid and proposal (B&P) costs on contracts for FMS not wholly paid for from funds made available on a nonrepayable basis is limited to the contract's allocable share of the contractor's total IR&D expenditures and total B&P expenditures. In pricing contracts for such FMS -

(1) Use the best estimate of reasonable costs in forward pricing; and

(2) Use actual expenditures, to the extent that they are reasonable, in determining final cost.

(d) Under paragraph (e)(1)(A) of Section 21 of the Arms Export Control Act (22 U.S.C. 2761), the United States must charge for administrative services to recover the estimated cost of administration of sales made under the Army Export Control Act.

(e) The limitations in 231.205-1 on allowability of costs associated with leasing Government equipment do not apply to FMS contracts.

If a government-to-government agreement between the United States and a foreign government for the sale, coproduction, or cooperative logistic support of a specifically defined weapon system, major end item, or support item, contains language in conflict with the provisions of this section, the language of the government-to-government agreement prevails.

(a) Except as provided in paragraph (b) of this subsection, contingent fees are generally allowable under DoD contracts, provided—

(1) The fees are paid to a bona fide employee or a bona fide established commercial or selling agency maintained by the prospective contractor for the purpose of securing business (see FAR Part 31 and FAR Subpart 3.4); and

(2) The contracting officer determines that the fees are fair and reasonable.

(b)(1) Under DoD 5105.38-M, LOAs for requirements for the governments of Australia, Taiwan, Egypt, Greece, Israel, Japan, Jordan, Republic of Korea, Kuwait, Pakistan, Philippines, Saudi Arabia, Turkey, Thailand, or Venezuela (Air Force) shall provide that all U.S. Government contracts resulting from the LOAs prohibit the reimbursement of contingent fees as an allowable cost under the contract, unless the contractor identifies the payments and the foreign customer approves the payments in writing before contract award (see 225.7307 (a)).

(2) For FMS to countries not listed in paragraph (b)(1) of this subsection, contingent fees exceeding $50,000 per FMS case are unallowable under DoD contracts, unless the contractor identifies the payment and the foreign customer approves the payment in writing before contract award.

(a) In accordance with 22 U.S.C. 2762(d), price FMS wholly paid for from funds made available on a nonrepayable basis on the same costing basis with regard to profit, overhead, IR&D/B&P, and other costing elements as is applicable to acquisitions of like items purchased by DoD for its own use.

(b) Direct costs associated with meeting a foreign customer’s additional or unique requirements are allowable under such contracts. Indirect burden rates applicable to such direct costs are permitted at the same rates applicable to acquisitions of like items purchased by DoD for its own use.

(c) A U.S. defense contractor may not recover costs incurred for offset agreements with a foreign government or international organization if the LOA is financed with funds made available on a nonrepayable basis.

(a) Except as provided in paragraph (b) of this section, when acquiring small arms for assistance to the Army of Afghanistan, the Afghani Police Forces, or other Afghani security organizations—

(1) Use full and open competition to the maximum extent practicable, consistent with the provisions of 10 U.S.C. 3201;

(2) If use of other than full and open competition is justified in accordance with FAR Subpart 6.3, ensure that—

(i) No responsible U.S. manufacturer is excluded from competing for the acquisition; and

(ii) Products manufactured in the United States are not excluded from the competition; and

(3) If the exception at FAR 6.302-2 (unusual and compelling urgency) applies, do not exclude responsible U.S. manufacturers or products manufactured in the United States from the competition for the purpose of administrative expediency. However, such an offer may be rejected if it does not meet delivery schedule requirements.

(b) Paragraph (a)(2) of this section does not apply when—

(1) The exception at FAR 6.302-1 (only one or a limited number of responsible sources) applies, and the only responsible source or sources are not U.S. manufacturers or are not offering products manufactured in the United States; or

(2) The exception at FAR 6.302-4 (international agreement) applies, and United States manufacturers or products manufactured in the United States are not the source(s) specified in the written directions of the foreign government reimbursing the agency for the cost of the acquisition of the property or services for such government.

Any textile components supplied by DoD to the Afghan National Army or the Afghan National Police for purpose of production of uniforms shall be produced in the United States.

(a) Subject to the requirements of 225.7703-2, except as provided in 225.7702, a product or service (including construction), in support of operations in Afghanistan, may be acquired by—

(1) Providing a preference for products or services from Afghanistan in accordance with the evaluation procedures at 225.7703-3 ;

(2) Limiting competition to products or services from Afghanistan; or

(3) Using procedures other than competitive procedures to award a contract to a particular source or sources from Afghanistan. When other than competitive procedures are used, the contracting officer shall document the contract file with the rationale for selecting the particular source(s).

(b) For acquisitions conducted using a procedure specified in paragraph (a) of this subsection, the justification and approval addressed in FAR Subpart 6.3 is not required.

(c) When issuing solicitations and contracts for performance in Afghanistan, follow the procedures at PGI 225.7703-1 (c).

Before use of a procedure specified in 225.7703-1 (a), a written determination must be prepared and executed as follows:

(a) For products or services to be used only by the military forces, police, or other security personnel of Afghanistan, the contracting officer shall—

(1) Determine in writing that the product or service is to be used only by the military forces, police, or other security personnel of Afghanistan; and

(2) Include the written determination in the contract file.

(b) For products or services not limited to use by the military forces, police, or other security personnel of Afghanistan, the following requirements apply:

(1) The appropriate official specified in paragraph (b)(2) of this subsection must determine in writing that it is in the national security interest of the United States to use a procedure specified in 225.7703-1 (a), because—

(i) The procedure is necessary to provide a stable source of jobs in Afghanistan; and

(ii) Use of the procedure will not adversely affect—

(A) Operations in Afghanistan (including security, transition, reconstruction, and humanitarian relief activities); or

(B) The U.S. industrial base. The authorizing official generally may presume that there will not be an adverse effect on the U.S. industrial base. However, when in doubt, the authorizing official should coordinate with the applicable subject matter expert specified in PGI 225.7703-2 (b).

(2) Determinations may be made for an individual acquisition or a class of acquisitions meeting the criteria in paragraph (b)(1) of this subsection as follows:

(i) The head of the contacting activity is authorized to make a determination that applies to an individual acquisition with a value of less than $100 million.

(ii) The Principal Director, Defense Pricing, Contracting, and Acquisition Policy, and the following officials, without power of redelegation, are authorized to make a determination that applies to an individual acquisition with a value of $100 million or more or to a class of acquisitions:

(A) Defense Logistics Agency Component Acquisition Executive.

(B) Army Acquisition Executive.

(C) Navy Acquisition Executive.

(D) Air Force Acquisition Executive.

(E) Commander of the United States Central Command Joint Theater Support Contracting Command (C–JTSCC).

(3) The contracting officer—

(i) Shall include the applicable written determination in the contract file; and

(ii) Shall ensure that each contract action taken pursuant to the authority of a class determination is within the scope of the class determination, and shall document the contract file for each action accordingly.

(c) See PGI 225.7703-2 (c) for formats for use in preparation of the determinations required by this subsection.

Evaluate offers submitted in response to solicitations that include the provision at 252.225-7023 , Preference for Products or Services from Afghanistan, as follows:

(a) If the low offer is an offer of a product or service from Afghanistan, award on that offer.

(b) If there are no offers of a product or service from Afghanistan, award on the low offer.

(c) Otherwise, apply the evaluation factor specified in the solicitation to the low offer.

(1) If the price of the low offer of a product or service from Afghanistan is less than the evaluated price of the low offer, award on the low offer of a product or service from Afghanistan.

(2) If the evaluated price of the low offer remains less than the low offer of a product or service from Afghanistan, award on the low offer.

(a) Use the provision at 252.225-7023, Preference for Products or Services from Afghanistan, in solicitations, including solicitations using FAR part 12 procedures for the acquisition of commercial products and commercial services, that provide a preference for products or services from Afghanistan in accordance with 225.7703-1(a)(1). The contracting officer may modify the 50 percent evaluation factor in accordance with contracting office procedures.

(b) Use the clause at 252.225-7024, Requirement for Products or Services from Afghanistan, in solicitations, including solicitations using FAR part 12 procedures for the acquisition of commercial products and commercial services, that include the provision at 252.225-7023, Preference for Products or Services from Afghanistan, and in the resulting contract.

(c) Use the clause at 252.225-7026, Acquisition Restricted to Products or Services from Afghanistan, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial products and commercial services, that -

(1) Are restricted to the acquisition of products or services from Afghanistan in accordance with 225.7703-1(a)(2); or

(2) Will be directed to a particular source or sources from Afghanistan in accordance with 225.7703-1(a)(3).

(d) Use the clause at 252.225-7029, Acquisition of Uniform Components for Afghan Military or Afghan National Police, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial products and commercial services, for the acquisition of any textile components that DoD intends to supply to the Afghan National Army or the Afghan National Police for purposes of production of uniforms.

(e) When the Trade Agreements Act applies to the acquisition, use the appropriate clause and provision as prescribed at 225.1101 (5) and (6).

(f) Do not use any of the following provisions or clauses in solicitations or contracts that include the provision at 252.225-7023, the clause at 252.225-7024, or the clause at 252.225-7026:

(1) 252.225-7000, Buy American - Balance of Payments Program Certificate.

(2) 252.225-7001, Buy American and Balance of Payments Program.

(3) 252.225-7002, Qualifying Country Sources as Subcontractors.

(4) 252.225-7035, Buy American - Free Trade Agreements - Balance of Payments Program Certificate.

(5) 252.225-7036, Buy American - Free Trade Agreements - Balance of Payments Program.

(6) 252.225-7044, Balance of Payments Program - Construction Material.

(7) 252.225-7045, Balance of Payments Program - Construction Material Under Trade Agreements.

(g) Do not use the following clause or provision in solicitations or contracts that include the clause at 252.225-7026:

(1) 252.225-7020, Trade Agreements Certificate.

(2) 252.225-7021, Trade Agreements.

As authorized by the United States Trade Representative, the Secretary of Defense has waived the prohibition in section 302(a) of the Trade Agreements Act (see subpart 225.4) for acquisitions by DoD, and by GSA on behalf of DoD, of products and services from SC/CASA states in direct support of operations in Afghanistan.

The Deputy Secretary of Defense has determined, because of importance to national security, that it would be inconsistent with the public interest to apply the provisions of the Balance of Payments Program (see subpart 225.75) to offers of end products other than arms, ammunition, and war materials (i.e., end products listed in 225.401-70 ) and construction materials from the SC/CASA states that are being acquired by or on behalf of DoD in direct support of operations in Afghanistan.

Appropriate solicitation provisions and contract clauses are prescribed as alternates to the Buy American-Trade Agreements-Balance of Payments Program solicitation provisions and contract clauses prescribed at 225.1101 and 225.7503 .

The contracting officer shall not obligate or expend funds for a construction or other infrastructure program or project of the Department in Afghanistan if military or civilian personnel of the United States Government or their representatives, with authority to conduct oversight of such program or project, cannot safely access such program or project. In limited circumstances, this prohibition may be waived in accordance with section 225.7705-2 .

(a) The prohibition in 225.7705-1 may be waived upon issuance of a determination, approved in accordance with paragraph (b) of this section, that—

(1) The program or project clearly contributes to United States national interests or strategic objectives;

(2) The Government of Afghanistan has requested or expressed a need for the program or project;

(3) The program or project has been coordinated with the Government of Afghanistan, and with any other implementing agencies or international donors;

(4) Security conditions permit effective implementation and oversight of the program or project;

(5) Safeguards to detect, deter, and mitigate corruption and waste, fraud, and abuse of funds are in place;

(6) Adequate arrangements have been made for the sustainment of the program or project following its completion, including arrangements with respect to funding and technical capacity for sustainment; and

(7) Meaningful metrics have been established to measure the progress and effectiveness of the program or project in meeting its objectives.

(b) The following officials are authorized to approve the determination described in paragraph (a) of this section:

(1) In the case of a program or project with an estimated lifecycle cost of less than $1 million, by the contracting officer.

(2) In the case of a program or project with an estimated lifecycle cost of $1 million or more, but less than $20 million, by the senior U.S. officer in the Combined Security Transition Command-Afghanistan.

(3) In the case of a program or project with an estimated lifecycle cost of $20 million or more, but less than $40 million, by the Commander of United States Forces-Afghanistan.

(4) In the case of a program or project with an estimated lifecycle cost of $40 million or more, by the Secretary of Defense.

(c) Congressional notification is required within 15 days of issuance of a determination to waive the prohibition for programs or projects valued at $40 million or more in accordance with paragraph (b)(4) of this section.

(a) The contracting officer shall not obligate or expend funds for contracts for a construction or other infrastructure program or project in Afghanistan, awarded after December 23, 2016, unless the requiring activity provides the following documentation:

(1) Written affirmation that military or civilian personnel of the United States Government or their representatives, with authority to conduct oversight of such program or project, can safely access such program or project; or

(2)(i) For programs or projects valued at less than $1 million, sufficient information upon which to base the determination described in 225.7705-2 (a); or

(ii)(A) For programs or projects valued at $1 million or more, a copy of the approved determination described in 225.7705-2 (a) and (b); and

(B) For programs or projects valued at $40 million or more, a copy of the Congressional notification described in 225.7705-2 (c).

(b) After contract award, the contracting officer shall review the requiring activity’s progress reports (e.g., contracting officer’s representative reports) that addresses whether access continues to be safe or security conditions continue to permit effective implementation and oversight of the contract. If the requiring activity does not affirm continued safe access or, if a determination to waive the prohibition has been approved, that security conditions continue to permit effective implementation and oversight of the contract, then the contracting officer shall consult with the requiring activity to take any appropriate actions.

“Export-controlled items,” as used in this section, is defined in the clause at 252.225-7048 .

Certain types of items are subject to export controls in accordance with the Arms Export Control Act (22 U.S.C. 2751, et seq.), the International Traffic in Arms Regulations (22 CFR Parts 120-130), the Export Administration Act of 1979, as amended (50 U.S.C. App. 2401 et seq.), and the Export Administration Regulations (15 CFR Parts 730-774). See PGI 225.7901-2 for additional information.

(a) It is in the interest of both the Government and the contractor to be aware of export controls as they apply to the performance of DoD contracts.

(b) It is the contractor’s responsibility to comply with all applicable laws and regulations regarding export-controlled items. This responsibility exists independent of, and is not established or limited by, this section.

Use the clause at 252.225-7048 , Export-Controlled Items, in all solicitations and contracts.

"Approved community," “defense articles," “Defense Trade Cooperation (DTC) Treaty”, "export," “Implementing Arrangement," “qualifying defense articles,” "transfer," and "U.S. DoD Treaty-eligible requirements" are defined in contract clause DFARS 252.225-7047 , Exports by Approved Community Members in Performance of the Contract.

The DTC Treaties permits the export of certain U.S. defense articles, technical data, and defense services, without U.S. export licenses or other written authorization under the International Traffic in Arms Regulation (ITAR) into and within the Approved Community, as long as the exports are in support of purposes specified in the DTC Treaties. All persons must continue to comply with statutory and regulatory requirements outside of DFARS and ITAR concerning the import of defense articles and defense services or the possession or transfer of defense articles, including, but not limited to, regulations issued by the Bureau of Alcohol, Tobacco, Firearms and Explosives found at 27 CFR Parts 447, 478, and 479, which are unaffected by the DTC Treaties. The Approved Community consists of U.S. entities that are registered with the Department of State and are eligible exporters, the U.S. Government, and certain governmental and commercial facilities in Australia and the United Kingdom that are approved and listed by the U.S. Government. See PGI 225.7902-2 for additional information.

DoD will facilitate maximum use of the DTC Treaties by prospective contractors responding to DoD solicitations and by contractors eligible to export qualifying defense articles under DoD contracts in accordance with 22 CFR 126.16(g) and 22 CFR 126.17(g).

(a) For all solicitations and contracts that may be eligible for DTC Treaty coverage (see PGI 225.7902-4 (1)), the program manager shall identify in writing and submit to the contracting officer prior to issuance of a solicitation and prior to award of a contract—

(1) The qualifying DTC Treaty Scope paragraph (Article 3(1)(a), 3(1)(b), or 3(1)(d) of the U.S.-Australia DTC Treaty or Article (3)(1)(a), (3(1)(b), or 3(1)(d) of the U.S.-U.K. DTC Treaty); and

(2) The qualifying defense article(s) using the categories described in 22 CFR 126.16(g) and 22 CFR 126.17(g).

(b) If applicable, the program manager shall also identify in writing and submit to the contracting officer any specific Part C, DTC Treaty-exempted technology list items, terms and conditions for applicable contract line item numbers (See PGI 225.7902-4 (2)).

(a) Use the provision at 252.225-7046 , Exports by Approved Community Members in Response to the Solicitation, in solicitations containing the clause at 252.225-7047 .

(b)(1) Use the clause at 252.225-7047 , Exports by Approved Community Members in Performance of the Contract, in solicitations and contracts when—

(i) Export-controlled items are expected to be involved in the performance of the contract and the clause at 252.225-7048 is used; and

(ii) At least one contract line item is intended to satisfy a U.S. DoD Treaty-eligible requirement.

(2) The contracting officer shall complete paragraph (b) of the clause using information the program manager provided as required by 225.7902-4 (a).