Alternate I. As prescribed in 225.1101 (10)(i) and (10)(i)(B), use the following clause, which uses a different paragraph (c) than the basic clause:

BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM— ALTERNATE I (FEB 2024)

(a) Definitions.As used in this clause—

Bahraini end product means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Commercially available off-the-shelf (COTS) item”—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

“Component” means an article, material, or supply incorporated directly into an end product.

“Critical component” means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

“Critical item” means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

“Domestic end product” means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract in accordance with Defense Federal Acquisition Regulation Supplement (DFARS) 225.101(d); or award is made before January 1, 2030, for a foreign end product that exceeds 55 percent domestic content (see DFARS 225.103(b)(ii)). The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

“End product” means those articles, materials, and supplies to be acquired under this contract for public use.

“Foreign end product” means an end product other than a domestic end product.

“Free Trade Agreement country” means Australia, Bahrain,Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

“Free Trade Agreement country end product” means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Moroccan end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Panamanian end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Peruvian end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Predominantly of iron or steel or a combination of both” means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Australia

Austria

Belgium

Canada

Czech Republic

Denmark

Egypt

Estonia

Finland

France

Germany

Greece

Israel

Italy

Japan

Latvia

Lithuania

Luxembourg

Netherlands

Norway

Poland

Portugal

Slovenia

Spain

Sweden

Switzerland

Turkey

United Kingdom of Great Britain and Northern Ireland.

“Qualifying country component” means a component mined, produced, or manufactured in a qualifying country.

“Qualifying country end product” means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(ii) The end product is a COTS item.

“Steel” means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

“United States” means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate I provision of the solicitation. * * *

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(End of clause)

Alternate II. As prescribed in 225.1101 (10)(i) and (10)(i)(C), use the following clause, which adds “South Caucasus/Central and South Asian (SC/CASA) state” and “South Caucasus/Central and South Asian (SC/CASA) state end product” to paragraph (a), and uses a different paragraph (c) than the basic clause:

BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM—ALTERNATE II (FEB 2024)

(a) Definitions.As used in this clause—

Bahraini end product means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Commercially available off-the-shelf (COTS) item”—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

“Component” means an article, material, or supply incorporated directly into an end product.

“Critical component” means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

“Critical item” means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

“Domestic end product” means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract in accordance with Defense Federal Acquisition Regulation Supplement (DFARS) 225.101(d)); or award is made before January 1, 2030, for a foreign end product that exceeds 55 percent domestic content (see DFARS 225.103(b)(ii)). The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

“End product” means those articles, materials, and supplies to be acquired under this contract for public use.

“Foreign end product” means an end product other than a domestic end product.

“Free Trade Agreement country” means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

“Free Trade Agreement country end product” means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Moroccan end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Panamanian end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Peruvian end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Predominantly of iron or steel or a combination of both” means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Australia

Austria

Belgium

Canada

Czech Republic

Denmark

Egypt

Estonia

Finland

France

Germany

Greece

Israel

Italy

Japan

Latvia

Lithuania

Luxembourg

Netherlands

Norway

Poland

Portugal

Slovenia

Spain

Sweden

Switzerland

Turkey

United Kingdom of Great Britain and Northern Ireland.

“Qualifying country component” means a component mined, produced, or manufactured in a qualifying country.

“Qualifying country end product” means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(ii) The end product is a COTS item.

“South Caucasus/Central and South Asian (SC/CASA) state” means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

“South Caucasus/Central and South Asian (SC/CASA) state end product” means an article that—

(1) Is wholly the growth, product, or manufacture of an SC/CASA state; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Steel” means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

“United States” means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, SC/CASA state end products, Free Trade Agreement country end products other than Bahraini end products, Moroccan end products, Panamanian end products, or Peruvian end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate II provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product, SC/CASA state end products, or a Free Trade Agreement country end product other than a Bahraini end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, the Contractor shall deliver a qualifying country end product, an SC/CASA state end product, a Free Trade Agreement country end product other than a Bahraini end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(End of clause)

Alternate III. As prescribed in 225.1101 (10)(i) and (10)(i)(D), use the following clause, which adds“South Caucasus/Central and South Asian (SC/CASA) state,” and “South Caucasus/Central and South Asian (SC/CASA) state end product” to paragraph (a) and uses a different paragraph (c) than the basic clause:

BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM—ALTERNATE III (FEB 2024)

(a) Definitions.As used in this clause—

Bahraini end product means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Commercially available off-the-shelf (COTS) item”—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

“Component” means an article, material, or supply incorporated directly into an end product.

“Critical component” means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

“Critical item” means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

“Domestic end product” means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract in accordance with Defense Federal Acquisition Regulation Supplement (DFARS) 225.101(d)); or award is made before January 1, 2030, for a foreign end product that exceeds 55 percent domestic content (see DFARS 225.103(b)(ii)). The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron and steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

“End product” means those articles, materials, and supplies to be acquired under this contract for public use.

“Foreign end product” means an end product other than a domestic end product.

“Free Trade Agreement country” means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

“Free Trade Agreement country end product” means an article that—

(i) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Moroccan end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Panamanian end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Peruvian end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Predominantly of iron or steel or a combination of both” means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Australia

Austria

Belgium

Canada

Czech Republic

Denmark

Egypt

Estonia

Finland

France

Germany

Greece

Israel

Italy

Japan

Latvia

Lithuania

Luxembourg

Netherlands

Norway

Poland

Portugal

Slovenia

Spain

Sweden

Switzerland

Turkey

United Kingdom of Great Britain and Northern Ireland.

“Qualifying country component” means a component mined, produced, or manufactured in a qualifying country.

“Qualifying country end product” means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract:

(A) Components mined, produced, or manufactured in a qualifying country.

(C) Components mined, produced, or manufactured in the United States.

(B) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(ii) The end product is a COTS item.

“South Caucasus/Central and South Asian (SC/CASA) state” means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

“South Caucasus/Central and South Asian (SC/CASA) state end product” means an article that—

(1) Is wholly the growth, product, or manufacture of an SC/CASA state; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Steel” means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

“United States” means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, SC/CASA state end products or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate III provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product, SC/CASA state end products the Contractor shall deliver a qualifying country end product, an SC/CASA state end product,or, at the Contractor’s option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(End of clause)

Alternate IV. As prescribed in 225.1101 (10)(i) and (10)(i)(E), use the following clause, which adds “Korean end product” to paragraph (a), and uses a different paragraph (c) than the basic clause:

BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM—ALTERNATE III (FEB 2024)

(a) Definitions.As used in this clause—

Bahraini end product means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Commercially available off-the-shelf (COTS) item”—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

“Component” means an article, material, or supply incorporated directly into an end product.

“Critical component” means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

“Critical item” means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

“Domestic end product” means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—]

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract in accordance with Defense Federal Acquisition Regulation Supplement (DFARS) 225.101(d)); or award is made before January 1, 2030, for a foreign end product that exceeds 55 percent domestic content (see DFARS 225.103(b)(ii)). The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

“End product” means those articles, materials, and supplies to be acquired under this contract for public use.

“Foreign end product” means an end product other than a domestic end product.

“Free Trade Agreement country” means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

“Free Trade Agreement country end product” means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Korean end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Korea; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Korea (Republic of) into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product, includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Moroccan end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Panamanian end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Peruvian end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Predominantly of iron or steel or a combination of both” means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Australia

Austria

Belgium

Canada

Czech Republic

Denmark

Egypt

Estonia

Finland

France

Germany

Greece

Israel

Italy

Japan

Latvia

Lithuania

Luxembourg

Netherlands

Norway

Poland

Portugal

Slovenia

Spain

Sweden

Switzerland

Turkey

United Kingdom of Great Britain and Northern Ireland.

“Qualifying country component” means a component mined, produced, or manufactured in a qualifying country.

“Qualifying country end product” means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

“Steel” means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

“United States” means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, Free Trade Agreement country end products other than Bahraini end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate IV provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product or a Free Trade Agreement country end product other than a Bahraini end product, a Korean end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, the Contractor shall deliver a qualifying country end product, a Free Trade Agreement country end product other than a Bahraini end product, a Korean end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(End of clause)

Alternate V. As prescribed in 225.1101 (10)(i) and (10)(i)(F), use the following clause, which adds “Korean end product,” “South Caucasus/Central and South Asian (SC/CASA) state,” and “South Caucasus/Central and South Asian (SC/CASA) state end product” to paragraph (a), and uses a different paragraph (c) than the basic clause:

BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM—ALTERNATE V (FEB 2024)

(a) Definitions.As used in this clause—

Bahraini end product means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Commercially available off-the-shelf (COTS) item”—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

“Component” means an article, material, or supply incorporated directly into an end product.

“Critical component” means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

“Critical item” means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

“Domestic end product” means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract in accordance with Defense Federal Acquisition Regulation Supplement (DFARS) 225.101(d)); or award is made before January 1, 2030, for a foreign end product that exceeds 55 percent domestic content (see DFARS 225.103(b)(ii)). The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

“End product” means those articles, materials, and supplies to be acquired under this contract for public use.

“Foreign end product” means an end product other than a domestic end product.

“Free Trade Agreement country” means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

“Free Trade Agreement country end product” means an article that—

(i) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Korean end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Korea; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Korea (Republic of) into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product, includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Moroccan end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Panamanian end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Peruvian end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Predominantly of iron or steel or a combination of both” means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Australia

Austria

Belgium

Canada

Czech Republic

Denmark

Egypt

Estonia

Finland

France

Germany

Greece

Israel

Italy

Japan

Latvia

Lithuania

Luxembourg

Netherlands

Norway

Poland

Portugal

Slovenia

Spain

Sweden

Switzerland

Turkey

United Kingdom of Great Britain and Northern Ireland.

“Qualifying country component” means a component mined, produced, or manufactured in a qualifying country.

“Qualifying country end product” means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds 60 percent of the cost of all its components, except that the percentage will be 65 percent for items delivered in calendar years 2024 through 2028 and 75 percent for items delivered starting in calendar year 2029, unless an alternate percentage is established for a contract :

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

“South Caucasus/Central and South Asian (SC/CASA) state” means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

“South Caucasus/Central and South Asian (SC/CASA) state end product” means an article that—

(1) Is wholly the growth, product, or manufacture of an SC/CASA state; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product, includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Steel” means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

“United States” means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, SC/CASA state end products, Free Trade Agreement country end products other than Bahraini end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate V provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product, SC/CASA state end products, or a Free Trade Agreement country end product other than a Bahraini end product, a Korean end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, the Contractor shall deliver a qualifying country end product, an SC/CASA state end product, a Free Trade Agreement country end product other than a Bahraini end product, a Korean end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(End of clause)

Alternate VI. As prescribed in 225.1101(10) (i) and (10) (i)( G ) , use the following clause, which includes, in the definitions of “domestic end product” at paragraph (1)(ii)(A) and “qualifying country end product” at paragraph (2)(i), the domestic content threshold that will apply to the entire contract period of performance:

BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTSPROGRAM—ALTERNATE VI (FEB 2024)

(a) Definitions. As used in this clause—

“Bahraini end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Commercially available off-the-shelf (COTS) item”—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

“Component” means an article, material, or supply incorporated directly into anend product.

“Critical component” means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

“Critical item” means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

“Domestic end product” means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign.Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

“End product” means those articles, materials, and supplies to be acquired under this contract for public use.

“Foreign end product” means an end product other than a domestic end product.

“Free Trade Agreement country” means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

“Free Trade Agreement country end product” means an article that–

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Moroccan end product” means an article that–

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Panamanian end product” means an article that–

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Peruvian end product” means an article that–

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Predominantly of iron or steel or a combination of both” means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act ( 22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Australia

Austria

Belgium

Canada

Czech Republic

Denmark

Egypt

Estonia

Finland

France

Germany

Greece

Israel

Italy

Japan

Latvia

Lithuania

Luxembourg

Netherlands

Norway

Poland

Portugal

Slovenia

Spain

Sweden

Switzerland

Turkey

United Kingdom of Great Britain and Northern Ireland.

“Qualifying country component” means a component mined, produced, or manufactured in a qualifying country.

“Qualifying country end product” means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

“Steel” means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

“United States” means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, Free Trade Agreement country end products other than Bahraini end products, Moroccan end products, Panamanian end products, or Peruvian end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Basic provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product or a Free Trade Agreement country end product other than a Bahraini end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, the Contractor shall deliver a qualifying country end product, a Free Trade Agreement country end product other than a Bahraini end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(End of clause)

Alternate VII. As prescribed in 225.1101(10)(i) and (10)(i)(H), use the following clause, which includes, in the definitions of “domestic end product” at paragraph (1)(ii)(A) and “qualifying country end product” at paragraph (2)(i), the domestic content threshold that will apply to the entire contract period of performance and uses a different paragraph (c) than the basic clause:

BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM—ALTERNATE VII (FEB 2024)

(a) Definitions. As used in this clause—

“Bahraini end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Commercially available off-the-shelf (COTS) item”—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

“Component” means an article, material, or supply incorporated directly into an end product.

“Critical component” means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

“Critical item” means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

“Domestic end product” means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign.Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

“End product” means those articles, materials, and supplies to be acquired under this contract for public use.

“Foreign end product” means an end product other than a domestic end product.

“Free Trade Agreement country” means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

“Free Trade Agreement country end product” means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Moroccan end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Panamanian end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Peruvian end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Predominantly of iron or steel or a combination of both” means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Australia

Austria

Belgium

Canada

Czech Republic

Denmark

Egypt

Estonia

Finland

France

Germany

Greece

Israel

Italy

Japan

Latvia

Lithuania

Luxembourg

Netherlands

Norway

Poland

Portugal

Slovenia

Spain

Sweden

Switzerland

Turkey

United Kingdom of Great Britain and Northern Ireland.

“Qualifying country component” means a component mined, produced, or manufactured in a qualifying country.

“Qualifying country end product” means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

“Steel” means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

“United States” means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate I provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product, the Contractor shall deliver a qualifying country end product or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(End of clause)

Alternate VIII. As prescribed in 225.1101(10)(i) and (10)(i)(I), use the following clause, which includes, in the definitions of “domestic end product” at paragraph (1)(ii)(A) and “qualifying country end product” at paragraph (2)(i), the domestic content threshold that will apply to the entire contract period of performance; adds “South Caucasus/Central and South Asian (SC/CASA) state” and “South Caucasus/Central and South Asian (SC/CASA) state end product” to paragraph (a); and uses a different paragraph (c) than the basic clause:

BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM—ALTERNATE VIII (FEB 2024)

(a) Definitions. As used in this clause—

“Bahraini end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Commercially available off-the-shelf (COTS) item”—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

“Component” means an article, material, or supply incorporated directly into an end product.

“Critical component” means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

“Critical item” means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

“Domestic end product” means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

“End product” means those articles, materials, and supplies to be acquired under this contract for public use.

“Foreign end product” means an end product other than a domestic end product.

“Free Trade Agreement country” means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

“Free Trade Agreement country end product” means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Moroccan end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Panamanian end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Peruvian end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Predominantly of iron or steel or a combination of both” means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Australia

Austria

Belgium

Canada

Czech Republic

Denmark

Egypt

Estonia

Finland

France

Germany

Greece

Israel

Italy

Japan

Latvia

Lithuania

Luxembourg

Netherlands

Norway

Poland

Portugal

Slovenia

Spain

Sweden

Switzerland

Turkey

United Kingdom of Great Britain and Northern Ireland.

“Qualifying country component” means a component mined, produced, or manufactured in a qualifying country.

“Qualifying country end product” means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

“South Caucasus/Central and South Asian (SC/CASA) state” means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

“South Caucasus/Central and South Asian (SC/CASA) state end product” means an article that—

(1) Is wholly the growth, product, or manufacture of an SC/CASA state; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Steel” means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

“United States” means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, SC/CASA state end products, Free Trade Agreement country end products other than Bahraini end products, Moroccan end products, Panamanian end products, or Peruvian end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate II provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product, SC/CASA state end products, or a Free Trade Agreement country end product other than a Bahraini end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, the Contractor shall deliver a qualifying country end product, an SC/CASA state end product, a Free Trade Agreement country end product other than a Bahraini end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(End of clause)

Alternate IX. As prescribed in 225.1101(10)(i) and (10)(i)(J), use the following clause, which includes in the definitions of “domestic end product” at paragraph (1)(ii)(A) and “qualifying country end product” at paragraph (2)(i) the domestic content threshold that will apply to the entire contract period of performance; adds “South Caucasus/Central and SouthAsian (SC/CASA) state” and “South Caucasus/Central and South Asian (SC/CASA) state end product” to paragraph (a); and uses a different paragraph (c) than the basic clause:

BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM—ALTERNATE IX (FEB 2024)

(a) Definitions. As used in this clause—

“Bahraini end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Commercially available off-the-shelf (COTS) item”—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

“Component” means an article, material, or supply incorporated directly into an end product.

“Critical component” means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

“Critical item” means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

“Domestic end product” means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron and steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

“End product” means those articles, materials, and supplies to be acquired under this contract for public use.

“Foreign end product” means an end product other than a domestic end product.

“Free Trade Agreement country” means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

“Free Trade Agreement country end product” means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Moroccan end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Panamanian end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Peruvian end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Predominantly of iron or steel or a combination of both” means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Australia

Austria

Belgium

Canada

Czech Republic

Denmark

Egypt

Estonia

Finland

France

Germany

Greece

Israel

Italy

Japan

Latvia

Lithuania

Luxembourg

Netherlands

Norway

Poland

Portugal

Slovenia

Spain

Sweden

Switzerland

Turkey

United Kingdom of Great Britain and Northern Ireland.

“Qualifying country component” means a component mined, produced, or manufactured in a qualifying country.

“Qualifying country end product” means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

“South Caucasus/Central and South Asian (SC/CASA) state” means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

“South Caucasus/Central and South Asian (SC/CASA) state end product” means an article that—

(1) Is wholly the growth, product, or manufacture of an SC/CASA state; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Steel” means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

“United States” means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, SC/CASA state end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate III provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product or SC/CASA state end products, the Contractor shall deliver a qualifying country end product, an SC/CASA state end product, or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(End of clause)

Alternate X. As prescribed in 225.1101(10)(i) and (10)(i)(K), use the following clause, which includes, in the definitions of “domestic end product” at paragraph (1)(ii)(A) and “qualifying country end product” at paragraph (2)(i), the domestic content threshold that will apply to the entire contract period of performance; adds “Korean end product” to paragraph (a); and uses a differentparagraph (c) than the basic clause:

BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM—ALTERNATE X (FEB 2024)

(a) Definitions. As used in this clause—

“Bahraini end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Commercially available off-the-shelf (COTS) item”—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

“Component” means an article, material, or supply incorporated directly into an end product.

“Critical component” means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

“Critical item” means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

“Domestic end product” means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components.The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign. Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

“End product” means those articles, materials, and supplies to be acquired under this contract for public use.

“Foreign end product” means an end product other than a domestic end product.

“Free Trade Agreement country” means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

“Free Trade Agreement country end product” means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Korean end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Korea; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Korea (Republic of) into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product, includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Moroccan end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Panamanian end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Peruvian end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Predominantly of iron or steel or a combination of both” means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Australia

Austria

Belgium

Canada

Czech Republic

Denmark

Egypt

Estonia

Finland

France

Germany

Greece

Israel

Italy

Japan

Latvia

Lithuania

Luxembourg

Netherlands

Norway

Poland

Portugal

Slovenia

Spain

Sweden

Switzerland

Turkey

United Kingdom of Great Britain and Northern Ireland.

“Qualifying country component” means a component mined, produced, or manufactured in a qualifying country.

“Qualifying country end product” means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

“Steel” means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

“United States” means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, Free Trade Agreement country end products other than Bahraini end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate IV provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product or a Free Trade Agreement country end product other than a Bahraini end product, a Korean end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, the Contractor shall deliver a qualifying country end product, a Free Trade Agreement country end product other than a Bahraini end product, a Korean end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(End of clause)

Alternate XI. As prescribed in 225.1101(10)(i) and (10)(i)(L), use the following clause, which includes, in the definitions of “domestic end product” at paragraph (1)(ii)(A) and “qualifying country end product” at paragraph (2)(i), the domestic content threshold that will apply to the entire contract period of performance; adds “Korean end product,” “South Caucasus/Central and South Asian(SC/CASA) state,” and “South Caucasus/Central and South Asian (SC/CASA) state end product”to paragraph (a); and uses a different paragraph (c) than the basic clause:

BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM—ALTERNATE XI (FEB 2024)

(a) Definitions. As used in this clause—

“Bahraini end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Bahrain; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Commercially available off-the-shelf (COTS) item”—

(1) Means any item of supply (including construction material) that is—

(i) A commercial product (as defined in paragraph (1) of the definition of “commercial product” in section 2.101 of the Federal Acquisition Regulation (FAR));

(ii) Sold in substantial quantities in the commercial marketplace; and

(iii) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and

(2) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.

“Component” means an article, material, or supply incorporated directly into an end product.

“Critical component” means a component that is mined, produced, or manufactured in the United States and deemed critical to the U.S. supply chain. The list of critical components is at FAR 25.105.

“Critical item” means domestic construction material or a domestic end product that is deemed critical to the U.S. supply chain. The list of critical items is at FAR 25.105.

“Domestic end product” means—

(1) For an end product that does not consist wholly or predominantly of iron or steel or a combination of both—

(i) An unmanufactured end product mined or produced in the United States; or

(ii) An end product manufactured in the United States if—

(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Components of unknown origin are treated as foreign.Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—

(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or

(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or

(B) The end product is a COTS item; or

(2) For an end product that consists wholly or predominantly of iron or steel or a combination of both, an end product manufactured in the United States, if the cost of iron and steel not produced in the United States or a qualifying country constitutes less than 5 percent of the cost of all the components used in the end product (produced in the United States or a qualifying country means that all manufacturing processes of the iron or steel must take place in the United States or a qualifying country, except metallurgical processes involving refinement of steel additives). The cost of iron and steel not produced in the United States or a qualifying country includes but is not limited to the cost of iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings, not produced in the United States or a qualifying country, utilized in the manufacture of the end product and a good faith estimate of the cost of all iron or steel components not produced in the United States or a qualifying country, excluding COTS fasteners. Iron or steel components of unknown origin are treated as foreign. If the end product contains multiple components, the cost of all the materials used in such end product is calculated in accordance with the explanation of cost of components in paragraph (1)(ii)(A) of this definition.

“End product” means those articles, materials, and supplies to be acquired under this contract for public use.

“Foreign end product” means an end product other than a domestic end product.

“Free Trade Agreement country” means Australia, Bahrain, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.

“Free Trade Agreement country end product” means an article that—

(1) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Korean end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Korea; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Korea (Republic of) into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product, includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Moroccan end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Morocco; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Panamanian end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Panama; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Peruvian end product” means an article that—

(1) Is wholly the growth, product, or manufacture of Peru; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Predominantly of iron or steel or a combination of both” means that the cost of the iron and steel content exceeds 50 percent of the total cost of all its components. The cost of iron and steel is the cost of the iron or steel mill products (such as bar, billet, slab, wire, plate, or sheet), castings, or forgings utilized in the manufacture of the product and a good faith estimate of the cost of iron or steel components excluding COTS fasteners.

“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:

Australia

Austria

Belgium

Canada

Czech Republic

Denmark

Egypt

Estonia

Finland

France

Germany

Greece

Israel

Italy

Japan

Latvia

Lithuania

Luxembourg

Netherlands

Norway

Poland

Portugal

Slovenia

Spain

Sweden

Switzerland

Turkey

United Kingdom of Great Britain and Northern Ireland.

“Qualifying country component” means a component mined, produced, or manufactured in a qualifying country.

“Qualifying country end product” means—

(1) An unmanufactured end product mined or produced in a qualifying country; or

(2) An end product manufactured in a qualifying country if—

(i) The cost of the following types of components exceeds, for the entire period of performance for a contract awarded in: calendar year 2023, 60 percent of the cost of all its components; calendar years 2024 through 2028, 65 percent of the cost of all its components; or calendar year 2029 or later, 75 percent of the cost of all its components:

(A) Components mined, produced, or manufactured in a qualifying country.

(B) Components mined, produced, or manufactured in the United States.

(C) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States. Components of unknown origin are treated as foreign; or

(ii) The end product is a COTS item.

“South Caucasus/Central and South Asian (SC/CASA) state” means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.

“South Caucasus/Central and South Asian (SC/CASA) state end product” means an article that—

(1) Is wholly the growth, product, or manufacture of an SC/CASA state; or

(2) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product, includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.

“Steel” means an alloy that includes at least 50 percent iron, between 0.02 and 2 percent carbon, and may include other elements.

“United States” means the 50 States, the District of Columbia, and outlying areas.

(b) Unless otherwise specified, this clause applies to all items in the Schedule.

(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, SC/CASA state end products, Free Trade Agreement country end products other than Bahraini end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate V provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product, SC/CASA state end products, or a Free Trade Agreement country end product other than a Bahraini end product, a Korean end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, the Contractor shall deliver a qualifying country end product, an SC/CASA state end product, a Free Trade Agreement country end product other than a Bahraini end product, a Korean end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product or, at the Contractor's option, a domestic end product.

(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.

(End of clause)